KRYPTONITE DEATH GRIP TIE RODS (RTS* FOR SS SERIES CENTERLINK) 2011-2019

Have Questions?

+1 702-333-0868, M-F 9-6 PST

Kryptonite Products

|
SKU: KRTR11-FT-CL

KRYPTONITE DEATH GRIP TIE RODS (RTS* FOR SS SERIES CENTERLINK) 2011-2019

Sale price$379.99
Pickup available at 4301 S Valley View Blvd Unit 19 Usually ready in 2-4 days

KRYPTONITE DEATH GRIP TIE RODS (RTS* FOR SS SERIES CENTERLINK) 2011-2019

4301 S Valley View Blvd Unit 19

Pickup available, usually ready in 2-4 days

4301 South Valley View Boulevard
Unit 19
Las Vegas NV 89103
United States

+17023330868

Have Questions?

+1 702-333-0868, M-F 9-6 PST

Fits; 2011-2019 2500/3500 GM HD Trucks equipped with a Fabtech RTS Style Lift kit that utilizes an alternate size outer rod end only!

Part# KRTR11-FT-CL

*These Tie rods are built Specifically for the 2011-2019 GM HD Trucks Equipped with a Fabtech RTS Style Lift kit that utilizes an alternate size outer rod end only!

*Will Not Fit an OEM Knuckle. 

Attention; With the installation of an oversized Tie Rod, modification or alteration of the sway bar end link may be required. Replacement end links available here.

CLICK HERE FOR COMPLETE INSTALLATION INSTRUCTIONS

Engineered exclusively for the extreme demands of today's heavy duty truck.  Built with pride in the USA to work with stock or modified suspension. Kryptonite tie rods will fit any 2011-2019 2500/3500 GM HD Truck that has the centerlink mounted in the factory location and has Fabtech aftermarket knuckles. Using superior components and engineering, these tie rods easily outperform the competition. This pair is for use with your factory center link.

These Tie Rods can easily be upgraded later to pair with our SS Series Centerlink.

CLICK HERE TO SEE CENTERLINK UPGRADE KIT

Details:

  • Heat treated chromoly nickel outer studs.
  • Bulletproof, all steel inner ball sockets. 
  • Solid 1 1/4" Hexagon steel body.
  • Left and Right hand jam nuts for the ultimate adjust ability.

 

In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite Death Grip tie rods. The OEM tie rods fail at 9000 pounds of pressure.  The much larger diameter aftermarket tie rods designed to fit lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite Death Grip tie rods held up to an incredible 21000 pounds of pressure before pulling apart.

All of our ball joints and rod ends come pre-greased with premium Chevron Ultra EP2 Grease and are ready to install. Servicing will be done every 7-10k miles. (A small amount of grease is needed per joint, do not over grease)


(Kryptonite No Fine Print Lifetime warranty)-Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off road it, sled pull it, wreck it, lift it, level it, lower it, I think you get it? We don’t care. If you can break it we will replace it.

All Kryptonite tie rods are pre-greased with Chevron's ultra duty EP2 (Extreme Pressure) grease they should be serviced with this grease at each oil change. Your Kryptonite products must be purchased from an authorized dealer.