Elevate Suspension Rear Leaf Springs, 2” Lift, 2005+ Tacoma 2/4WD

Have Questions?

+1 702-333-0868, M-F 9-6 PST

Elevate Suspension Rear Leaf Springs, 2” Lift, 2005+ Tacoma 2/4WD

Sale price$1,138.22
IN-STOCK
Pickup available at 4301 S Valley View Blvd Unit 19 Usually ready in 2-4 days

Elevate Suspension Rear Leaf Springs, 2” Lift, 2005+ Tacoma 2/4WD

4301 S Valley View Blvd Unit 19

Pickup available, usually ready in 2-4 days

4301 South Valley View Boulevard
Unit 19
Las Vegas NV 89103
United States

+17023330868

Have Questions?

+1 702-333-0868, M-F 9-6 PST

The Toyota Tacoma’s factory rear springs are easily overwhelmed. Throw almost any amount of weight into the bed of the Tacoma, and the factory springs go into a negative arch. With minimal up travel, the result is a rough ride as the rear suspension constantly bottom outs. Our Element Hard Parts Excursion Series Springs solve this lack of suspension performance by completely replacing the crappy OEM rear springs. With nine thin leaves, the Excursion Series Springs yield a very progressive ride while still handling up to 300 lbs. of constant payload. A military-wrap design prevents you from getting stuck in the boonies if the main leaf ever fails. And, anti-friction pads eliminate squeaking and keep you sane. The Excursion Series Springs provide two inches of lift in the rear and will significantly improve the performance of the Tacoma's rear suspension. 

  • A replacement spring that eliminates the shortcomings of the factory leaf spring
  • Uses a 9-leaf pack of multiple thin leaves for a very progressive feel
  • A smooth ride on smaller chop while still being able to absorb bigger hits
  • Provides 2 inches of lift in the rear of the Tacoma to clear larger tires
  • Uses a military wrap design for safety and strength
  • Comes with anti-friction pads for quiet operation
  • Each leaf has a diamond-cut end for maximum flex
  • Built using USA-sourced 5160 spring steel
  • Has stout retaining pins to keep leaves aligned
  • Made to handle an additional 0-300 lbs. of weight in the bed
  • Perfect for those that go off-road with camping gear, dirt bikes, or extra weight in the bed of their trucks
  • A pair of Element Hard Parts Excursion Series Springs, U-bolts and Hardware

Q: How much lift will these give me?

A: The springs are designed to give 2” over stock height. Springs will typically sit slightly higher when first installed.

  1. Stage 1 Lift w/ Performance Series – Part Number: K600
  2. Stage 1 Lift w/ Factory Series – Part Number: K601
  3. Stage 2 Lift w/ Performance Series – Part Number: K602
  4. Element Billet UCA – Part Number: 1004
  5. Stage 3 Lift w/ Factory Series - Part Number: K605