{"product_id":"jk-1-ton-basics-rear-axle-swap-kit-with-9-inch-truss-07-18-wrangler-jk-artec","title":"JK 1 TON BASICS Rear Axle Swap Kit with 9 inch Truss 07-18 Wrangler JK Artec","description":"\u003cp\u003eJK 1 Ton Basics Rear Axle Swap Kit with Truss. All the brackets and truss necessary for swapping in a 1 ton rear axle into a Jeep JK Wrangler ('07-'18).\u003c\/p\u003e\u003cp\u003eArtec Industries is excited to announce the JK 1 Ton Basics Rear Axle Swap Kit with Truss. This is a basic bracket system which can be used on practically any axle with a 3.5 inch axle tube (or similar).\u003c\/p\u003e\u003cp\u003eThis kit provides the factory link, trackbar, spring, anti-sway bar, bump stop pads and shock locations. The kit includes a template for correctly spacing your brackets off the differential casting for AAM 10.5 inch 14 bolt axles and Sterling 10.5 axles found in Ford Superduty.\u003c\/p\u003e\u003cp\u003eOther axles can be used as well, just make sure they are wide enough to fit the upper control arm brackets and you have a plan for mounting the ABS sensors.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUsing a 1 ton axle will support larger tires and less chance of breakage in extreme conditions\u003c\/li\u003e\n\u003cli\u003eAPEX Truss CNC laser cut from 3\/16 inch steel and CNC bent for a precise fit\u003c\/li\u003e\n\u003cli\u003eBrackets CNC laser cut from 1\/4 inch, 3\/16 inch and 1\/8 inch steel for high strength and precision and CNC bent for great fitment.\u003c\/li\u003e\n\u003cli\u003eIncludes all the brackets necessary for a complete axle swap including upper and lower control arm mounts, shock mounts, anti-sway bar mounts, trackbar mount, bumpstop pads and coil spring mounts.\u003c\/li\u003e\n\u003cli\u003eSave hours of installation time. Coil brackets are offset from differential casting using include template. All other brackets line up to each other, no guessing and measuring involved.\u003c\/li\u003e\n\u003cli\u003eTracbar mount includes 4 locations for those who have aftermarket lifts. Stock height hole is not included though.\u003c\/li\u003e\n\u003cli\u003eEasily upgradeable for future link geometry changes. Just trim off factory location upper control mounts and weld on a truss and center link mount (not included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070532112537,"sku":"GNKQ_JK6114","price":560.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/JK6114-GNKQ.jpg?v=1767774198","url":"https:\/\/battlebornoffroad.com\/products\/jk-1-ton-basics-rear-axle-swap-kit-with-9-inch-truss-07-18-wrangler-jk-artec","provider":"Battle Born Offroad","version":"1.0","type":"link"}