{"product_id":"ftk-01-fuel-tank-kit-ford-and-ram","title":"FTK-01 Fuel Tank Kit (Ford and Ram)","description":"\u003cp\u003eTo install the sulastic model SAJ-03B it is required to free the interference of the original combustible line route.\u003c\/p\u003e    \u003cp\u003eSulastic develop a deviator combustible tank included in the FTK-01 \"Fuel Tank Kit\" to make an easier and more convenient installation than using combustible rubber hoses and fittings.\u003c\/p\u003e   \u003cp\u003eFor the installation will be required to re-use most of the original combustible line components already installed on the truck.\u003c\/p\u003e   \u003cp\u003eReview the next list of the components included in the kit and compare to what you will need to re-route the combustible line trying to avoid an extra trip to the autoparts store.\u003c\/p\u003e         \u003cp\u003eThe kit includes:\u003c\/p\u003e     \u003cp\u003eA (1) Sulastic Deviator Tank (8-1\/4\" center to center)\u003c\/p\u003e  \u003cp\u003e1ft length of 1-1\/2 ID combustible hose\u003c\/p\u003e  \u003cp\u003eB (1)  5-3\/4\" Ft length of 1- 1\/2\" ID  combustible hose\u003c\/p\u003e  \u003cp\u003eC (4) Hose clamp for 1-1\/2 ID hose\u003c\/p\u003e  \u003cp\u003eD (1) 1.5 ft of 3\/4\" ID combustible emission hose\u003c\/p\u003e  \u003cp\u003eE (3) Hose clamp for 3\/4\" ID hose\u003c\/p\u003e  \u003cp\u003eF (1) 90 Elbow for 3\/4\" ID hose\u003c\/p\u003e  \u003cp\u003eG (1) Zip tie of 30\" length\u003c\/p\u003e  \u003cp\u003eH  (1) 1 fT 1- 1\/2\" ID  combustible hose\u003c\/p\u003e           \u003cp\u003eSAJ-03B model requires 12” clearance horizontally to the rear bumper and 11\" clearance vertically,  taking the measurement from the hanger bolt center.\u003c\/p\u003e     \u003cp\u003eSPACE AVAILABLE SAJ\u003c\/p\u003e     \u003cp\u003eOn the driver's side it is required to redirect the diesel or gas intake.\u003c\/p\u003e      \u003cp\u003eREDIRECTTHEINTAKEGAS  gasfuelhose\u003c\/p\u003e   \u003cp\u003eIn this case you can buy the FHK-01 FUEL HOSE KIT \/ FHK-02 FUEL HOSE KIT or \/ FTK-01 FUEL TANK KIT\u003c\/p\u003e   \u003cp\u003e*****************************************************************************************************************************************************************************\u003c\/p\u003e   \u003cp\u003eINSTALLATION NOTES:\u003c\/p\u003e   \u003cp\u003eCAUTION: Do not have any open flame or heat source close to the installation area\u003c\/p\u003e     \u003cp\u003e1.    Disconnect the battery cables during installation.\u003c\/p\u003e     \u003cp\u003e2.    The fill and vent tube must have a continuous downward slope from the upper fillneck to the tank or the system will not fill properly. If a sag occurs the truck's combustible tank will not fill properly.\u003c\/p\u003e     \u003cp\u003e3.    Based on your specific needs, use the appropriate the 1 ½” I.D. fill hoses to complete the routing of the fill system between the upper fillneck and the fuel tank. Use the stainless-steel hose clamp on each connection. And use plastic ties to hold the hose in place.\u003c\/p\u003e   \u003cp\u003e4. Based on your specific needs, use the appropriate the 3\/4 I.D. vent hoses to complete the routing of the fill system between the upper fillneck and the fuel tank. Use the stainless-steel hose clamp on each connection. Use plastic ties to hold vent hose to fill hose.\u003c\/p\u003e   \u003cp\u003efuel Hose position\u003c\/p\u003e  \u003cp\u003e5. Make sure before filling the tank:\u003cbr\u003e    a. Fill hose is not kinked.\u003cbr\u003e    b. Fill vent hose is not kinked or sagging.\u003cbr\u003e    c. Fill hoses and tube have a continuous downward slope \u003cbr\u003e    d. Hose clamps are adjusted to avoid leaks\u003cbr\u003e    e. Hose is not contacting sharp surfaces\u003c\/p\u003e         \u003cp\u003e*****************************************************************************************************************************************************************************\u003c\/p\u003e      \u003cp\u003eExample of FTK-01 FUEL TANK KIT installed.\u003c\/p\u003e\u003cbr\u003e    \u003cp\u003eThe original one.\u003c\/p\u003e                                                                                                                               \u003cp\u003eFUELHOSEINSTALLED\u003c\/p\u003e             \u003cp\u003eThe first thing to do is verify that the SAJ-03B suspension has the space to be installed at both sides.\u003c\/p\u003e \u003cbr\u003e           \u003cp\u003eThen you need to unscrew the 3\/4 and 1-1\/2 fuel hose clamps at the ends.\u003c\/p\u003e\u003cbr\u003e           \u003cp\u003eA is assembled with B and C. This assembly mounts to the truck's fuel tank with C using the side of the hose.\u003c\/p\u003e\u003cbr\u003e            \u003cp\u003eYou have to attach the tank to the chassis with G.\u003c\/p\u003e            \u003cp\u003eNow we have to assemble D with F using E to adjust it. This assembly mounts to the fuel tank truck with E using the side of the hose.\u003cbr\u003e        The next step is to figure out H and the original hoses to join the fuel inlet to the Sulastic Deviator Tank with the 1-1\/2 hoses (In this case C and H was the hose that was used to connect the fuel inlet with the sulastic tank), and the 3\/4 hoses use them to connect the fuel inlet to the F.\u003c\/p\u003e\u003cbr\u003e              \u003cp\u003eThe sulastic tank with the sulastic will look like the picture, the sulastic doesn’t hit the fuel hose and the sulastic tank.\u003c\/p\u003e","brand":"SULASTIC","offers":[{"title":"Default Title","offer_id":47326100521113,"sku":"FTK-01","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/0001653_ftk-01-fuel-tank-kit-ford-and-ram_550.jpg?v=1778528192","url":"https:\/\/battlebornoffroad.com\/products\/ftk-01-fuel-tank-kit-ford-and-ram","provider":"Battle Born Offroad","version":"1.0","type":"link"}