{"product_id":"fhk-02-fuel-hose-kit-ford-and-ram","title":"FHK-02 Fuel Hose Kit (Ford and Ram)","description":"\u003cp\u003eThis kit is used when the hose where fuel is loaded is in the same place where the Sulastic suspension will be installed on chassis-cab trucks.\u003c\/p\u003e           \u003cp\u003ePlease check the space available in your truck, you need 12” for the sulastic model SAJ-03B or SAJ-03B 3\/4\u003c\/p\u003e     \u003cp\u003eSPACE AVAILABLE SAJ\u003c\/p\u003e     \u003cp\u003eOn the driver's side it is required to redirect the diesel or gas intake.\u003c\/p\u003e      \u003cp\u003eREDIRECTTHEINTAKEGAS  gasfuelhose\u003c\/p\u003e   \u003cp\u003eIn this case you can buy the FHK-01 FUEL HOSE KIT or FHK-02 FUEL HOSE KIT\u003c\/p\u003e   \u003cp\u003eFHK-02 is recommended when you can shift to rear (Ford and Ram), when you cannot shift to rear and you need more parts to\u003c\/p\u003e   \u003cp\u003echange the position of the fuel load the one that you need is the FHK-01.\u003c\/p\u003e\u003cbr\u003e       \u003cp\u003eFHK-02 FUEL HOSE KIT (FORD AND RAM)\u003c\/p\u003e  \u003cp\u003eFuel Hose Kit Includes:\u003c\/p\u003e              \u003cp\u003e(1.5 ft) 1-1\/2\" fuel hose\u003cbr\u003e         (6) Stainless steel hose clamp for 1-1\/2\" fuel hose\u003cbr\u003e         (2) Fuel hose 90 degree elbow for 1-1\/2\" fuel hose\u003cbr\u003e         (2) Hose connectors for 1-1\/2\" fuel hose\u003cbr\u003e         3 (ft) 3\/4\" Emission fuel hose \u003cbr\u003e         (6) Stainless steel hose clamp for 3\/4\" fuel hose\u003cbr\u003e         (2) Fuel hose 90 degree elbow for 3\/4\" fuel hose\u003cbr\u003e         Stainlesstell Mesh to cover the 1-1\/2\" Hose\u003cbr\u003e         (5) Zip ties\u003c\/p\u003e\u003cbr\u003e    \u003cp\u003eINSTALLATION NOTES:\u003c\/p\u003e   \u003cp\u003eCAUTION: Do not have any open flame or heat source close to the installation area\u003c\/p\u003e     \u003cp\u003e1.    Disconnect the battery cables during installation.\u003c\/p\u003e     \u003cp\u003e2.    The fill and vent tube must have a continuous downward slope from the upper fillneck to the tank or the system will not fill properly. If a sag occurs the tank will not fill properly.\u003c\/p\u003e     \u003cp\u003e3.    Based on your specific needs, use the appropriate the 1 ½” I.D. fill hoses to complete the routing of the fill system between the upper fillneck and the fuel tank. Use the stainless-steel hose clamp on each connection. And use plastic ties to hold the hose in place.\u003c\/p\u003e   \u003cp\u003e4. Based on your specific needs, use the appropriate the 3\/4 I.D. vent hoses to complete the routing of the fill system between the upper fillneck and the fuel tank. Use the stainless-steel hose clamp on each connection. Use plastic ties to hold vent hose to fill hose.\u003c\/p\u003e   \u003cp\u003efuel Hose position\u003c\/p\u003e  \u003cp\u003e5. Make sure before filling the tank:\u003cbr\u003e    a. Fill hose is not kinked.\u003cbr\u003e    b. Fill vent hose is not kinked or sagging.\u003cbr\u003e    c. Fill hoses and tube have a continuous downward slope \u003cbr\u003e    d. Hose clamps are adjusted to avoid leaks\u003cbr\u003e    e. Hose is not making contact with sharp surfaces\u003c\/p\u003e","brand":"SULASTIC","offers":[{"title":"Default Title","offer_id":47326102945945,"sku":"FHK-02","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/0001612_fhk-02-fuel-hose-kit-ford-and-ram_550.jpg?v=1778528378","url":"https:\/\/battlebornoffroad.com\/products\/fhk-02-fuel-hose-kit-ford-and-ram","provider":"Battle Born Offroad","version":"1.0","type":"link"}