{"title":"Suspension \/ Steering \/ Brakes","description":null,"products":[{"product_id":"tacoma-4-25-inch-rear-bump-stops-for-95-16-tacoma-durobumps","title":"Tacoma 4.25 Inch Rear Bump Stops For 95-16 Tacoma DuroBumps","description":"\u003cp\u003e1st Gen Tacoma rear bump stops eliminate the shell shock effect we're all familiar with when hitting OEM bump stops. Our duel durometer bump stops easily absorb hard impacts and helps keep the vehicle stable at higher speeds in rough conditions.\u003c\/p\u003e\u003cp\u003eThe 4.25 inch rear bump stop is intended for trucks with a rear lift of 2 inch and extended shocks of up to 1 inch. These bump stops have been designed to stop wheel up travel under articulation prior to extended shocks bottoming out.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDual Durometer Rubber in DuroBumps allows for a smooth initial contact, with a progressively firmer compression rate to provide the ultimate bump stop.\u003c\/li\u003e\n\u003cli\u003eSmall, compact, application-specific bump stops.\u003c\/li\u003e\n\u003cli\u003eDuroBumps is the only application-specific bump stop manufacturer.\u003c\/li\u003e\n\u003cli\u003eWe do not manufacture a universal-fit bump stops.\u003c\/li\u003e\n\u003cli\u003eNo loss of up travel. With DuroBumps being made with Dual Durometer Rubber the bump stops compress in a smooth predictable fashion.\u003c\/li\u003e\n\u003cli\u003eThick 1\/8 inch powder-coated steel base plate provides strong support for the DuroBumps and ensures solid mounting.\u003c\/li\u003e\n\u003cli\u003eSome light modifications will be required (i.e. cutting and drilling to fit your specific application).\u003c\/li\u003e\n\u003cli\u003eDuroBumps are made from the highest quality raw materials.\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware JIS 10.9 corrosion-resistant, metric hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The included standard 1\/8 inch steel mounting plate may also be utilized to adapt to existing U-bolt flip kits. Some light modifications will be required (i.e. cutting and drilling to fit your specific application).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1st Gen Toyota Tacoma 4.25 inch Rear DuroBumps (x2)\u003c\/li\u003e\n\u003cli\u003eJIS 10.9 metric corrosion-resistant bolts (x4)\u003c\/li\u003e\n\u003cli\u003eSingle-use blue thread locker\u003c\/li\u003e\n\u003cli\u003eU-Bolt Flip Kit w\/ OEM 9\/16 x 3.25 x 7.75 inch Black U-Bolts\u003c\/li\u003e\n\u003cli\u003eStandard powdered-coated 1\/8 inch steel plate for OEM square U-bolts.\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstall instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eU-Bolt Flip Kits\u003c\/strong\u003e\u003cbr\u003eYou need to measure your existing rear suspension from the bottom of the axle tube to the top of the leaf pack. Add 2 inch to your measurement and that will give you the length of U-Bolt you need. For example, the distance from the bottom of the axle tube to the top of the leaf pack measure 5.5 inch.\u003c\/p\u003e\u003cp\u003eThen you add the 2 inch required for the U-Bolt flip plate and mounting hardware. This equals 7.5 inch in which case you would choose the 7.75 inch U-Bolt Flip Kit.\u003c\/p\u003e\u003cp\u003ePlease note all U-Bolts have 3 inch of thread.\u003c\/p\u003e\u003cp\u003eDuroBumps are not a replacement for air or hydro bump stops. DuroBumps are for trail off-roaders, rock crawlers, and overlanders. At a minimum, DuroBumps require proper suspension setup and roll cage to safely and responsibly drive at high speeds off-road.\u003c\/p\u003e\u003cp\u003eOur products are not recommended for high-speed pre-runner applications nor towing. DuroBumps are the industry-leading premium bump stops available on the market and we're sure you will agree!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e For off-road use only. By installing these aftermarket bump stops on your vehicle you assume all risk and liability. Seller will not be held liable for any damages or loss associated with the installation or use of this product for any reason.\u003c\/p\u003e","brand":"DuroBumps","offers":[{"title":"Default Title","offer_id":45759523520665,"sku":"JGJK_DBR425T","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/DBR425T-JGJK.jpg?v=1759259402"},{"product_id":"extreme-duty-soft-shackle-3-8-x-20-inch-factor-55","title":"Extreme Duty Soft Shackle 3\/8 x 20 Inch Factor 55","description":"\u003cp\u003eSoft shackles may be used as a lightweight replacement connecting rigging for common steel screw pin shackles. The Factor 55 10 inch and 20 inch diameter Extreme Duty Soft Shackles are made in the USA under the uncompromised Factor 55 quality standards.\u003c\/p\u003e\u003cp\u003eLike all Factor 55 rigging products, these shackles have been lab and field tested to assure consistent minimum breaking strength values. Each extreme duty soft shackle is constructed of HMPE Plasma rope that includes additional abrasion and UV protection with a woven polyester jacket that is carefully whipped and coated with Fiber Lock.\u003c\/p\u003e\u003cp\u003eNote how the protective jacket is attached close to the knot, providing as much abrasion protection as possible. For their size and weight, these Extreme Duty Soft Shackles provide an additional 25-30 percent verified breaking strengths when compared to common standard soft shackles on the market today.\u003c\/p\u003e\u003cp\u003eThe longer 20 inch diameter version functions as a common soft shackle but also allows for the user to double loop the shackle resulting in breaking strengths exceeding 70,000 pounds. WLL and minimum breaking strengths clearly marked. \u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEngineered, Tested, and Made In The USA\u003c\/li\u003e\n\u003cli\u003eMinimum Breaking Strength 43,500 pounds\u003c\/li\u003e\n\u003cli\u003eWLL-8,700 Pounds\u003c\/li\u003e\n\u003cli\u003e3\/8 diameter plasma rope construction Weight\u003c\/li\u003e\n\u003cli\u003e10 Inch-6.5 ounces Weight\u003c\/li\u003e\n\u003cli\u003e20 Inch-10.5 ounces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Factor 55","offers":[{"title":"Default Title","offer_id":45773371277465,"sku":"GGBW_00067","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/00067_7-GGBW.jpg?v=1759854415"},{"product_id":"standard-duty-soft-shackle-1-2-inch-x-10-inch-factor-55","title":"Standard Duty Soft Shackle 1\/2 Inch X 10 Inch Factor 55","description":"\u003cp\u003eSoft shackles may be used as a lightweight replacement connecting rigging for common steel screw pin shackles. The Factor 55 10 inch (pull to pull length) Standard Duty Soft Shackles are Made in the USA under the uncompromised Factor 55 quality standards. Like all Factor 55 rigging products, these shackles have been lab and field-tested to assure consistent repeatable minimum breaking strength values.\u003c\/p\u003e\u003cp\u003eEach Standard Duty soft shackle is constructed of 1\/2 inch diameter UHMWPE 12 strand rope similar in construction to synthetic winch lines. WLL and minimum breaking strengths clearly marked.\u003c\/p\u003e\u003cp\u003eThis product is compatible with Closed System Winching, a technique that uses rigging comprised entirely of closed-link hardware. With Closed System Winching you get the extra security and confidence needed to tackle the most demanding winch recoveries.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMinimum Breaking Strength - 60,000 pounds\u003c\/li\u003e\n\u003cli\u003eWLL - 12,000 Pounds. Weight - 7 ounces.\u003c\/li\u003e\n\u003cli\u003eEach individual soft shackle is serialized for manufacturing date and material lot traceability.\u003c\/li\u003e\n\u003cli\u003eNOTE- Easily fits standard shackle mount products.\u003c\/li\u003e\n\u003cli\u003eEngineered, Tested, and Made In The USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Factor 55","offers":[{"title":"Default Title","offer_id":45773378879641,"sku":"GGBW_00585","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/00585-GGBW.jpg?v=1759854774"},{"product_id":"10-inch-soft-shackle-7-16-diameter-standard-duty-gray-factor-55","title":"10 Inch Soft Shackle 7\/16 Diameter Standard Duty Gray Factor 55","description":"\u003cp\u003eStandard Duty 10 inch Soft Shackle. Soft shackles may be used as a lightweight replacement connecting rigging for common steel screw pin shackles. The Factor 55 10 inch Standard Duty Soft Shackles are Made in the USA under the uncompromised Factor 55 quality standards.\u003c\/p\u003e\u003cp\u003eLike all Factor 55 rigging products, these shackles have been lab and field tested to assure consistent repeatable minimum breaking strength values. Each Standard Duty soft shackle is constructed of 7\/16 diameter UHMWPE 12 strand rope similar in construction to synthetic winch lines.\u003c\/p\u003e\u003cp\u003eWLL and minimum breaking strengths clearly marked. Minimum Breaking Strength - 39,000 pounds WLL - 7,800 Pounds. Weight - 6.3 ounces. Each individual soft shackle is serialized for manufacturing date and material lot traceability.\u003cbr\u003eEngineered, Tested, and Made In The USA\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGray\u003c\/li\u003e\n\u003cli\u003eStandard Duty 10 inch\u003c\/li\u003e\n\u003cli\u003eSold As Each\u003c\/li\u003e\n\u003cli\u003e7\/16 diameter UHMWPE 12 strand rope\u003c\/li\u003e\n\u003cli\u003eMinimum Breaking Strength - 39,000 pounds WLL - 7,800 Pounds\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Factor 55","offers":[{"title":"Default Title","offer_id":45773379174553,"sku":"GGBW_*00069","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/2A00069-GGBW.jpg?v=1759854808"},{"product_id":"extreme-duty-soft-shackle-5-8-inch-x-18-inch-factor-55","title":"Extreme Duty Soft Shackle 5\/8 Inch X 18 Inch Factor 55","description":"\u003cp\u003eA lightweight replacement connecting rigging for common steel screw pin shackles. Factor 55 Soft Shackles are Made in the USA under uncompromising quality standards. They have been lab- and field-tested to ensure consistent repeatable minimum breaking strength values.\u003c\/p\u003e\u003cp\u003eThis product is compatible with Closed System Winching, a technique that uses rigging comprised entirely of closed-link hardware. With Closed System Winching you get the extra security and confidence needed to tackle the most demanding winch recoveries.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 5\/8 inch diameter x 18 inch length\u003c\/li\u003e\n\u003cli\u003eMBS: 102,500 lbs.\u003c\/li\u003e\n\u003cli\u003eWorking load limit 20,500 lbs.\u003c\/li\u003e\n\u003cli\u003eConstructed of HMPE Plasma rope with extra abrasion and UV protection\u003c\/li\u003e\n\u003cli\u003eWoven polyester jacket that is carefully whipped and coated with Fiber Lock\u003c\/li\u003e\n\u003cli\u003eThe protective jacket is attached close to the knot to provide as much abrasion protection as possible\u003c\/li\u003e\n\u003cli\u003eAdditional 25-30 percent verified breaking strengths when compared to standard soft shackles on the market today\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Factor 55","offers":[{"title":"Default Title","offer_id":45773415088281,"sku":"GGBW_00570","price":306.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/00570-GGBW.jpg?v=1759855293"},{"product_id":"extreme-duty-soft-shackle-7-8-inch-x-24-inch-factor-55","title":"Extreme Duty Soft Shackle 7\/8 Inch X 24 Inch Factor 55","description":"\u003cp\u003eA lightweight replacement connecting rigging for common steel screw pin shackles. Factor 55 Soft Shackles are Made in the USA under uncompromising quality standards. They have been lab- and field-tested to ensure consistent repeatable minimum breaking strength values.\u003c\/p\u003e\u003cp\u003eThis product is compatible with Closed System Winching, a technique that uses rigging comprised entirely of closed-link hardware. With Closed System Winching you get the extra security and confidence needed to tackle the most demanding winch recoveries.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 7\/8 inch diameter x 24 inch length\u003c\/li\u003e\n\u003cli\u003eMBS 185,000 lbs.\u003c\/li\u003e\n\u003cli\u003eWorking load limit 37,000 lbs.\u003c\/li\u003e\n\u003cli\u003eConstructed of HMPE Plasma rope with extra abrasion and UV protection\u003c\/li\u003e\n\u003cli\u003eWoven polyester jacket that is carefully whipped and coated with Fiber Lock\u003c\/li\u003e\n\u003cli\u003eThe protective jacket is attached close to the knot to provide as much abrasion protection as possible\u003c\/li\u003e\n\u003cli\u003eAdditional 25-30 percent verified breaking strengths when compared to standard soft shackles on the market today\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Factor 55","offers":[{"title":"Default Title","offer_id":45773415186585,"sku":"GGBW_00571","price":536.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/00571-GGBW.jpg?v=1759855302"},{"product_id":"extreme-duty-soft-shackle-1-1-8-inch-x-24-inch-factor-55","title":"Extreme Duty Soft Shackle 1 1\/8 Inch X 24 Inch Factor 55","description":"\u003cp\u003eA lightweight replacement connecting rigging for common steel screw pin shackles. Factor 55 Soft Shackles are Made in the USA under uncompromising quality standards. They have been lab- and field-tested to ensure consistent repeatable minimum breaking strength values.\u003c\/p\u003e\u003cp\u003eThis product is compatible with Closed System Winching, a technique that uses rigging comprised entirely of closed-link hardware. With Closed System Winching you get the extra security and confidence needed to tackle the most demanding winch recoveries.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 1-1\/8 inch diameter x 24 inch length\u003c\/li\u003e\n\u003cli\u003eMinimum breaking strength 294,000 lbs. Working load limit 58,000 lbs.\u003c\/li\u003e\n\u003cli\u003eConstructed of HMPE Plasma rope with extra abrasion and UV protection\u003c\/li\u003e\n\u003cli\u003eWoven polyester jacket that is carefully whipped and coated with Fiber Lock\u003c\/li\u003e\n\u003cli\u003eThe protective jacket is attached close to the knot to provide as much abrasion protection as possible\u003c\/li\u003e\n\u003cli\u003eAdditional 25-30 percent verified breaking strengths when compared to standard soft shackles on the market today\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Factor 55","offers":[{"title":"Default Title","offer_id":45773415252121,"sku":"GGBW_00572","price":873.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/00572-GGBW.jpg?v=1759855311"},{"product_id":"extreme-duty-soft-shackle-3-8-x-10-inch-factor-55","title":"Extreme Duty Soft Shackle 3\/8 x 10 Inch Factor 55","description":"\u003cp\u003eSoft shackles may be used as a lightweight replacement connecting rigging for common steel screw pin shackles. The Factor 55 10 inch and 20 inch diameter Extreme Duty Soft Shackles are made in the USA under the uncompromised Factor 55 quality standards.\u003c\/p\u003e\u003cp\u003eLike all Factor 55 rigging products, these shackles have been lab and field tested to assure consistent minimum breaking strength values. Each extreme duty soft shackle is constructed of HMPE Plasma rope that includes additional abrasion and UV protection with a woven polyester jacket that is carefully whipped and coated with Fiber Lock.\u003c\/p\u003e\u003cp\u003eNote how the protective jacket is attached close to the knot, providing as much abrasion protection as possible. For their size and weight, these Extreme Duty Soft Shackles provide an additional 25-30% verified breaking strengths when compared to common standard soft shackles on the market today.\u003c\/p\u003e\u003cp\u003eThe longer 20 inch diameter version functions as a common soft shackle but also allows for the user to double loop the shackle resulting in breaking strengths exceeding 70,000 pounds. WLL and minimum breaking strengths clearly marked. \u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEngineered, Tested, and Made In The USA\u003c\/li\u003e\n\u003cli\u003eMinimum Breaking Strength 43,500 pounds\u003c\/li\u003e\n\u003cli\u003eWLL-8,700 Pounds\u003c\/li\u003e\n\u003cli\u003e3\/8 diameter plasma rope construction Weight\u003c\/li\u003e\n\u003cli\u003e10 Inch-6.5 ounces Weight\u003c\/li\u003e\n\u003cli\u003e20 Inch-10.5 ounces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Factor 55","offers":[{"title":"Default Title","offer_id":45817165775001,"sku":"GGBW_00066","price":112.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/00066_5-GGBW.jpg?v=1761151902"},{"product_id":"10-inch-soft-shackle-7-16-diameter-standard-duty-gray-factor-56","title":"10 Inch Soft Shackle 7\/16 Diameter Standard Duty Gray Factor 55","description":"\u003cp\u003eStandard Duty 10 inch Soft Shackle. Soft shackles may be used as a lightweight replacement connecting rigging for common steel screw pin shackles. The Factor 55 10 inch Standard Duty Soft Shackles are Made in the USA under the uncompromised Factor 55 quality standards.\u003c\/p\u003e\u003cp\u003eLike all Factor 55 rigging products, these shackles have been lab and field tested to assure consistent repeatable minimum breaking strength values. Each Standard Duty soft shackle is constructed of 7\/16 diameter UHMWPE 12 strand rope similar in construction to synthetic winch lines.\u003c\/p\u003e\u003cp\u003eWLL and minimum breaking strengths clearly marked. Minimum Breaking Strength - 39,000 pounds WLL - 7,800 Pounds. Weight - 6.3 ounces. Each individual soft shackle is serialized for manufacturing date and material lot traceability.\u003cbr\u003eEngineered, Tested, and Made In The USA\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGray\u003c\/li\u003e\n\u003cli\u003eStandard Duty 10 inch\u003c\/li\u003e\n\u003cli\u003eSold As Each\u003c\/li\u003e\n\u003cli\u003e7\/16 diameter UHMWPE 12 strand rope\u003c\/li\u003e\n\u003cli\u003eMinimum Breaking Strength - 39,000 pounds WLL - 7,800 Pounds\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Factor 55","offers":[{"title":"Default Title","offer_id":45817165873305,"sku":"GGBW_00069","price":68.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/00069-GGBW.jpg?v=1761151909"},{"product_id":"jk-hd-crossmember-12-17-wrangler-jk-artec-industries","title":"JK HD Crossmember 12-17 Wrangler JK Artec Industries","description":"\u003cp\u003eJK HD Cross member. Artec Industries New JK HD Cross member is designed to give your 2007 - 2017 Jeep JK Wrangler better protection underneath the vehicle than the factory sheet metal. Designed using CAD files directly from the manufacturer, this HD Cross member ensures that you have a great fit with factory components. Made from 1\/4 inch thick Steel, and CNC cut and formed, the Artec JK HD Cross member will be sure to hold up to the abuse you put on your rig. This cross member changes the factory captured nuts from M12 to 3\/8 inch to work with our JK Under Armor Bellypan Kit. New skid plate hardware is Not shipped with this cross member but with the bellypan. New 3\/8 inch bolts will be needed along with extra wide washers that may be necessary For use with factory skid plates. Features:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Each\u003c\/li\u003e\n\u003cli\u003e2012-2017\u003c\/li\u003e\n\u003cli\u003e1\/4 inch thick steel For high abuse situations\u003c\/li\u003e\n\u003cli\u003eDesigned from factory CAD files For great and precise fit. Bolts right in.\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and CNC formed\u003c\/li\u003e\n\u003cli\u003eAll nuts are pressed into steel brackets For easy, one tool removal\u003c\/li\u003e\n\u003cli\u003ePre-welded so installation is quick and easy\u003c\/li\u003e\n\u003cli\u003eNot painted so it's easy to customize and touch-up when it scratches.\u003c\/li\u003e\n\u003cli\u003eChoose between standard replacement or long arm version with lower link mounts.\u003c\/li\u003e\n\u003cli\u003ePerfect companion to our JK UNDER ARMOR Bellypans For completely smooth under side.\u003c\/li\u003e\n\u003cli\u003eThis crossmember uses 3\/8 inch course threads captive nuts and bolts For the skid plates so you can get new flat head or button head Style bolts.\u003c\/li\u003e\n\u003cli\u003eHardware not included.\u003c\/li\u003e\n\u003cli\u003eThis product requires general mechanics skills and should only be installed by someone capable of using basic tools.\u003c\/li\u003e\n\u003cli\u003eArtec Industries is not responsible For incorrect installation.\u003c\/li\u003e\n\u003cli\u003eBy purchasing, the customer agrees that they are fully responsible For correct installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070480699545,"sku":"GNKQ_JK2003","price":516.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/JK2003-GNKQ.jpg?v=1767770853"},{"product_id":"superduty-high-steer-arm-kit-w-tapered-spacers-artec-industries","title":"Superduty High Steer Arm Kit W\/Tapered Spacers Artec Industries","description":"\u003cp\u003eSuper duty High Steer Arm Kit. Artec Industries is excited to announce our new high steer arm For 05-12 Ford Super duty F-250 and F-350 trucks. This high steer arm is For use with the aftermarket Reid Racing Super duty knuckle available. Together, this arm and knuckle allow the user to correct steering problems that are common on lifted Super dutys. This is a passenger side arm only. Driver side not available. Reid Racing does not currently make a driver side knuckle. \u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Kit\u003c\/li\u003e\n\u003cli\u003eSpacer Style: Tapered Ford Hole\u003c\/li\u003e\n\u003cli\u003eCNC machined from 1 inch thick cold roll steel and clear zinc plated For corrision resistance\u003c\/li\u003e\n\u003cli\u003eChoose between stainless steel spacer\/adapters For either 3\/4 inch bolt or a Ford 1-ton tapered drag link end.\u003c\/li\u003e\n\u003cli\u003eCorrects OEM steering geometry allowing drag link to mount above or under the arm depending on lift height\u003c\/li\u003e\n\u003cli\u003eCompatible with our JK 1-ton swap bracket Kit\u003c\/li\u003e\n\u003cli\u003eUses D60 ARP Studs And Nuts 5 Pack Kit.\u003c\/li\u003e\n\u003cli\u003eTracbar bracket modifications necessary when changing OEM steering geometry.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070480830617,"sku":"GNKQ_HS6111","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/HS6111-GNKQ.jpg?v=1767770867"},{"product_id":"dana60-knuckle-bolt-kit-oem-dodge-artec-industries","title":"Dana60 Knuckle Bolt Kit OEM Dodge Artec Industries","description":"\u003cp\u003e60 Knuckle Bolt Kit. This Knuckle Bolt Kit is designed to work specifically with our Ultimate 60 High Steer Arms to both strengthen the entire knuckle and steering as well as provide options For mounting your steering. Whether you just need to re-enforce your knuckle or want to run your tie rod Inch double sheer, this Kit is designed with to fit multiple different steering configurations. Refer to the diagram below For some of the possibilities. The Knuckle Bolt Kit includes one 3\/4 inch grade 8 bolt, one 3\/4 inch all- steel mechanical locking nut, and one 1.25 inch outer diameter, .250 inch wall sleeve . Two Kits Will Need To Be Purchased For A Pair Of High Steer Arms. This Kit Will Require Cutting The Sleeve Inch half To Run Heim Inch Double Sheer. Factory Knuckle Hole Will Need To Be Drilled With 3\/4 inch Hole. \u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Kit\u003c\/li\u003e\n\u003cli\u003eKnuckle Style: OEM Dodge not aftermarket\u003c\/li\u003e\n\u003cli\u003eFactory tie rod end holes on the knuckle will need to be drilled to a 3\/4 inch hole For this Kit to work.\u003c\/li\u003e\n\u003cli\u003eThis Will Require Use Of Basic Drilling Tools.\u003c\/li\u003e\n\u003cli\u003e3\/4 inch - 16 tpi 10 inch long Grade 8 bolt\u003c\/li\u003e\n\u003cli\u003e3\/4 inch - 16 tpi All-steel Mechanical Lock nut\u003c\/li\u003e\n\u003cli\u003eMachined 1.25 inch OD - .250 inch wall DOM sleeve\u003c\/li\u003e\n\u003cli\u003eIncreases overall knuckle and steering strength\u003c\/li\u003e\n\u003cli\u003eSleeve ends machined For 3\/4 inch heim Inch DOUBLE SHEER\u003c\/li\u003e\n\u003cli\u003eChoose your tie rod mounting height\u003c\/li\u003e\n\u003cli\u003eAll-steel mechanical locking nuts (aka distorted thread or Stover lock nuts) are designed Not to be reused to ensure the nut does not loosen over time.\u003c\/li\u003e\n\u003cli\u003eThis provides the best type of locking nut For steering applications.\u003c\/li\u003e\n\u003cli\u003ePlease use a new nut if you remove it at any point.\u003c\/li\u003e\n\u003cli\u003eThis part may require basic steel cutting tools to use.\u003c\/li\u003e\n\u003cli\u003ePlease use caution when cutting steel. Only experienced fabricators should attempt these modifications.\u003c\/li\u003e\n\u003cli\u003eArtec Industries, LLC is not liable For injury and\/or death due to use or modification of this product.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070482043033,"sku":"GNKQ_HS6082","price":49.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/HS6082-GNKQ.jpg?v=1767770874"},{"product_id":"dana-60-knuckle-bolt-kit-oem-chevy-reid-solid-crane-knuckles-artec-industries","title":"Dana 60 Knuckle Bolt Kit OEM Chevy, Reid, Solid, Crane Knuckles Artec Industries","description":"\u003cp\u003e60 Knuckle Bolt Kit. This Knuckle Bolt Kit is designed to work specifically with our Ultimate 60 High Steer Arms to both strengthen the entire knuckle and steering as well as provide options For mounting your steering. Whether you just need to re-enforce your knuckle or want to run your tie rod Inch double sheer, this Kit is designed with to fit multiple different steering configurations. Refer to the diagram below For some of the possibilities. The Knuckle Bolt Kit includes one 3\/4 inch grade 8 bolt, one 3\/4 inch all- steel mechanical locking nut, and one 1.25 inch outer diameter, .250 inch wall sleeve . Two Kits Will Need To Be Purchased For A Pair Of High Steer Arms. This Kit Will Require Cutting The Sleeve Inch half To Run Heim Inch Double Sheer. Factory Knuckle Hole Will Need To Be Drilled With 3\/4 inch Hole. \u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Kit\u003c\/li\u003e\n\u003cli\u003eKnuckle Style: All Reid Solid Crane OEM Chevy\u003c\/li\u003e\n\u003cli\u003eFactory tie rod end holes on the knuckle will need to be drilled to a 3\/4 inch hole For this Kit to work.\u003c\/li\u003e\n\u003cli\u003eThis Will Require Use Of Basic Drilling Tools.\u003c\/li\u003e\n\u003cli\u003e3\/4 inch - 16 tpi 10 inch long Grade 8 bolt\u003c\/li\u003e\n\u003cli\u003e3\/4 inch - 16 tpi All-steel Mechanical Lock nut\u003c\/li\u003e\n\u003cli\u003eMachined 1.25 inch OD - .250 inch wall DOM sleeve\u003c\/li\u003e\n\u003cli\u003eIncreases overall knuckle and steering strength\u003c\/li\u003e\n\u003cli\u003eSleeve ends machined For 3\/4 inch heim Inch DOUBLE SHEER\u003c\/li\u003e\n\u003cli\u003eChoose your tie rod mounting height\u003c\/li\u003e\n\u003cli\u003eAll-steel mechanical locking nuts (aka distorted thread or Stover lock nuts) are designed Not to be reused to ensure the nut does not loosen over time.\u003c\/li\u003e\n\u003cli\u003eThis provides the best type of locking nut For steering applications.\u003c\/li\u003e\n\u003cli\u003ePlease use a new nut if you remove it at any point.\u003c\/li\u003e\n\u003cli\u003eThis part may require basic steel cutting tools to use.\u003c\/li\u003e\n\u003cli\u003ePlease use caution when cutting steel. Only experienced fabricators should attempt these modifications.\u003c\/li\u003e\n\u003cli\u003eArtec Industries, LLC is not liable For injury and\/or death due to use or modification of this product.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070482403481,"sku":"GNKQ_HS6081","price":58.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/HS6081-GNKQ.jpg?v=1767770880"},{"product_id":"shock-plus-lower-link-axle-combo-brackets-22-degree-pair-artec-industries","title":"Shock Plus Lower Link Axle Combo Brackets 22 Degree Pair Artec Industries","description":"\u003cp\u003eShock plus Lower Link Axle Combo Brackets (pair). Is space tight on your axle and you can't mount your shocks? Or do you need to mount the shocks offset off the axle tube. This combo bracket takes our best selling Lower Link Axle Brackets and combines them with our new Lower Link Shock Tabs to allow you to mount your shocks offset from the axle tube. These tabs work on all three angles of lower link so you don't have to have some big specialty combo bracket that looks goofy and is bigger than a normal link bracket. These tabs also allow you to use different shock mounting widths so you don't have to spend time modifying either the bracket or the shocks to fit within a preset bracket width. Mount your shocks over the lower link joints; offset from the axle tube center line. Grease fitting access on top to allow Easy maintenance of your most abused joint. Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Pair\u003c\/li\u003e\n\u003cli\u003eLower Axle Link Angle: 22 degrees\u003c\/li\u003e\n\u003cli\u003eUse with any shock mounting width from 1.25 inch-1.6 inch. Great For Air Shocks, Coil overs or ORI struts.\u003c\/li\u003e\n\u003cli\u003eCompact design. Lower Link Axle Brackets are our standard mounts so no special bracket is used.\u003c\/li\u003e\n\u003cli\u003e2.625 inch mounting width with 9\/16 inch bolt hole For common sized Cartridge Joints (Johnny, Flex, Ballistic, etc).\u003c\/li\u003e\n\u003cli\u003eCan be drilled out to larger hole size For 1.25 inch rod ends with spacers.\u003c\/li\u003e\n\u003cli\u003eMade from 1\/4 inch thick boxed steel plate For strength and impact resistance.\u003c\/li\u003e\n\u003cli\u003eThe Style of the bracket gives a unique, custom one off look you'd get with a high dollar fabrication shop.\u003c\/li\u003e\n\u003cli\u003eNo more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.\u003c\/li\u003e\n\u003cli\u003eThis Kit requires general welding and fabrication skills. Welding should only be done by a competent welder.\u003c\/li\u003e\n\u003cli\u003eArtec Industries implies no guarantees or warranties and is not liable For improper installation.\u003c\/li\u003e\n\u003cli\u003eSome very slight grinding and fitment may be required when used with the 22 degree lower link axle bracket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070483484825,"sku":"GNKQ_BR1088","price":85.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/BR1088-GNKQ.jpg?v=1767770980"},{"product_id":"shock-plus-lower-link-axle-combo-brackets-10-degree-pair-artec-industries","title":"Shock Plus Lower Link Axle Combo Brackets 10 Degree Pair Artec Industries","description":"\u003cp\u003eShock plus Lower Link Axle Combo Brackets (pair). Is space tight on your axle and you can't mount your shocks? Or do you need to mount the shocks offset off the axle tube. This combo bracket takes our best selling Lower Link Axle Brackets and combines them with our new Lower Link Shock Tabs to allow you to mount your shocks offset from the axle tube. These tabs work on all three angles of lower link so you don't have to have some big specialty combo bracket that looks goofy and is bigger than a normal link bracket. These tabs also allow you to use different shock mounting widths so you don't have to spend time modifying either the bracket or the shocks to fit within a preset bracket width. Mount your shocks over the lower link joints; offset from the axle tube center line. Grease fitting access on top to allow Easy maintenance of your most abused joint. Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Pair\u003c\/li\u003e\n\u003cli\u003eLower Axle Link Angle: 10 degrees\u003c\/li\u003e\n\u003cli\u003eUse with any shock mounting width from 1.25 inch-1.6 inch. Great For Air Shocks, Coilovers or ORI struts.\u003c\/li\u003e\n\u003cli\u003eCompact design. Lower Link Axle Brackets are our standard mounts so no special bracket is used.\u003c\/li\u003e\n\u003cli\u003e2.625 inch mounting width with 9\/16 inch bolt hole For common sized Cartridge Joints (Johnny, Flex, Ballistic, etc). Can be drilled out to larger hole size For 1.25 inch rod ends with spacers.\u003c\/li\u003e\n\u003cli\u003eMade from 1\/4 inch thick boxed steel plate For strength and impact resistance.\u003c\/li\u003e\n\u003cli\u003eThe Style of the bracket gives a unique, custom one off look you'd get with a high dollar fabrication shop.\u003c\/li\u003e\n\u003cli\u003eNo more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.\u003c\/li\u003e\n\u003cli\u003eThis Kit requires general welding and fabrication skills. Welding should only be done by a competent welder.\u003c\/li\u003e\n\u003cli\u003eArtec Industries implies no guarantees or warranties and is not liable For improper installation.\u003c\/li\u003e\n\u003cli\u003eSome very slight grinding and fitment may be required when used with the 22 degree lower link axle bracket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070483550361,"sku":"GNKQ_BR1087","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/BR1087-GNKQ.jpg?v=1767770988"},{"product_id":"high-clearance-shock-brackets-pair-artec-industries","title":"High Clearance Shock Brackets Pair Artec Industries","description":"\u003cp\u003eClean, low-profile lines and a high-clearance design make these Artec Industries shock mounts strong parts when installed. The heavy steel units are designed to replace your worn shock brackets.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Pair\u003c\/li\u003e\n\u003cli\u003eThey require welding onto the side of the axle tube to install, and will handle some serious abuse.\u003c\/li\u003e\n\u003cli\u003eArtec universal high-clearance shock mounts are a great addition For all vehicles, due to their beefy strength and protection of the shocks.\u003c\/li\u003e\n\u003cli\u003eThis is a DIY product and should be installed by a competent welder only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070483746969,"sku":"GNKQ_BR1049","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/BR1049-GNKQ.jpg?v=1767771002"},{"product_id":"adjustable-panhard-mount-for-axle-offset-to-leading-edge-artec-industries","title":"Adjustable Panhard Mount For Axle Offset To Leading Edge Artec Industries","description":"\u003cp\u003eAdjustable Frame Panhard Mount. This panhard mount is For use with any 3-link or 4-link scenario. Designed For joints that have either a 1.75 inch mounting width such as 3\/4 inch and 7\/8 inch x 3\/4 inch rod ends with high misalignment spacers or those with a 2.625 inch mounting width such as bushings and cartridge joints.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Each\u003c\/li\u003e\n\u003cli\u003eOrientation: Offset to Leading Edge\u003c\/li\u003e\n\u003cli\u003eIt offer three holes at 2, 3.25, and 4.5 inches drop from frame to allow you to fine tune your suspension.\u003c\/li\u003e\n\u003cli\u003eOffered Inch either an outside the frame orientation or inside the frame.\u003c\/li\u003e\n\u003cli\u003eMay require a small amount of trimming if other brackets interfere.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070484467865,"sku":"GNKQ_BR1032","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/BR1032-GNKQ.jpg?v=1767771051"},{"product_id":"crossmember-bracket-large-4-link-tube-style-size-2-0-inch-square-tube-artec-industries","title":"Crossmember Bracket Large 4 Link Tube Style Size 2.0 Inch Square Tube Artec Industries","description":"\u003cp\u003eLarge 4-link Xmember Bracket. This bracket allows For triangulated lower links that meet at a 1.75 inch OD tube or 2.0 inch square tube cross member between frame rails. This bracket is For use with large joints that have a 2.625 inch mounting width. This includes, but is not limited to, 1.25 inch rod ends (heims) with misalignment spacers, and rebuildable cartridge Style joints with a 2.5 inch or 2.625 inch width (Johnny, Flex, Ballistic, etc). The hole size is 9\/16 inch and can be drilled For larger sizes. The angles are set at 22 degrees each (44 degrees total) to allow use with our angled lower link axle brackets. This bracket is made from .250 inch thick steel and comes Inch six unwelded pieces that jig together For Easy assembly. We recommend using heavy wall 1.75 inch tubing For your cross member For maximum strength.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Each\u003c\/li\u003e\n\u003cli\u003eTube Style\\ Size: 2.0 Square Tube\u003c\/li\u003e\n\u003cli\u003eWhat sets ours apart from other similar products?\u003c\/li\u003e\n\u003cli\u003eFirst, since lower links receive so much abuse from obstacles dragging across them, we've made the lower plate of this bracket cover most of the joint so that rocks aren't directly hitting the joint. This not only reduces the chance of joint breakage, but increases the life of the joint since it is not repeatedly being abused. You can save alot of money when you aren't having to replace joints all the time and that's the biggest advantage to this design.\u003c\/li\u003e\n\u003cli\u003eSecond, For those using greasable joints, the design of the top and side pieces allows easier access to the top of the joint where a grease zerk is usually located. Having a greasable joint does you no good when you can't access the grease fitting. Again, longer lasting joints means less money replacing them down the road.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070485123225,"sku":"GNKQ_BR1006","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/BR1006-GNKQ.jpg?v=1767771114"},{"product_id":"tj-8-8-swap-kit-oem-lca-brackets-pair-aka-tr8801-n-o-artec-industries","title":"TJ 8.8 Swap Kit OEM LCA Brackets Pair aka TR8801-N\/O Artec Industries","description":"\u003cp\u003eBy request, we're offering the same lower control arm brackets that we use Inch our popular TJ 8.8 swap Kit. This includes both the driver and passenger side LCA brackets only Inch the OEM positions. This Is Not The Whole Swap Kit.. Directly replaces parts TR8801-N and TR8801-O.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Pair\u003c\/li\u003e\n\u003cli\u003e2.625 inch mounting width with 9\/16 inch bolt hole For common sized Cartridge Joints (Johnny, Flex, Ballistic, etc).\u003c\/li\u003e\n\u003cli\u003eCan be drilled out to larger hole size For 1.25 inch rod ends with spacers.\u003c\/li\u003e\n\u003cli\u003eCut For 3.25 inch diameter axle tubes on the 8.8 axle.\u003c\/li\u003e\n\u003cli\u003eMay be used on other axles with minor modifications.\u003c\/li\u003e\n\u003cli\u003eOEM position is under the axle tube.\u003c\/li\u003e\n\u003cli\u003eMade from 1\/4 inch thick boxed steel plate For strength and impact resistance.\u003c\/li\u003e\n\u003cli\u003eGrease fitting access on top to allow easy maintenance of your most abused joint.\u003c\/li\u003e\n\u003cli\u003eThe Style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop.\u003c\/li\u003e\n\u003cli\u003eNo more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.\u003c\/li\u003e\n\u003cli\u003eThis part requires general welding and fabrication skills.\u003c\/li\u003e\n\u003cli\u003eWelding should only be done by a competent welder.\u003c\/li\u003e\n\u003cli\u003eArtec Industries implies no guarantees or warranties and is not liable For improper installation.\u003c\/li\u003e\n\u003cli\u003eSome grinding and fitment may be required when installing this product on other axles other than the 8.8.\u003c\/li\u003e\n\u003cli\u003eEvery axle varies slightly and some fabrication may be required.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070488563865,"sku":"GNKQ_TJ8805","price":71.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/TJ8805-GNKQ.jpg?v=1767771403"},{"product_id":"tj-8-8-swap-kit-oem-shock-mounts-pair-aka-tr8801-p-q-artec-industries","title":"TJ 8.8 Swap Kit OEM Shock Mounts Pair aka TR8801-P\/Q Artec Industries","description":"\u003cp\u003eBy request, we're offering the same shock mounts that we use Inch our popular TJ 8.8 swap Kit. This includes both the driver and passenger side shock mounts only Inch the OEM positions. This Is Not The Whole Swap Kit. Directly replaces parts TR8801-P and TR8801-Q.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Kit\u003c\/li\u003e\n\u003cli\u003e1.375 inch mounting width with 1\/2 inch bolt hole For standard shocks.\u003c\/li\u003e\n\u003cli\u003eCut For 3.25 inch diameter axle tubes of the 8.8 axle.\u003c\/li\u003e\n\u003cli\u003eMay be used on other axles with minor modifications.\u003c\/li\u003e\n\u003cli\u003eOEM position is under the axle tube.\u003c\/li\u003e\n\u003cli\u003eMade from 1\/4 inch thick boxed steel plate For strength and impact resistance.\u003c\/li\u003e\n\u003cli\u003eThe Style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop.\u003c\/li\u003e\n\u003cli\u003eNo more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.\u003c\/li\u003e\n\u003cli\u003eThis part requires general welding and fabrication skills. Welding should only be done by a competent welder.\u003c\/li\u003e\n\u003cli\u003eArtec Industries implies no guarantees or warranties and is not liable For improper installation.\u003c\/li\u003e\n\u003cli\u003eSome grinding and fitment may be required when installing this product on other axles other than the 8.8.\u003c\/li\u003e\n\u003cli\u003eEvery axle varies slightly and some fabrication may be required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070488629401,"sku":"GNKQ_TJ8804","price":45.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/TJ8804-GNKQ.jpg?v=1767771411"},{"product_id":"tj-8-8-swap-kit-sway-bar-brackets-pair-aka-tr8801-i-artec-industries","title":"TJ 8.8 Swap Kit Sway Bar Brackets Pair aka TR8801-I Artec Industries","description":"\u003cp\u003eBy request, we're offering the same sway bar brackets that we use Inch our popular TJ 8.8 swap Kit. This includes both the driver and passenger side axle sway bar brackets only Inch the OEM positions. This Is Not The Whole Swap Kit. Directly replaces part TR8801-I.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Kit\u003c\/li\u003e\n\u003cli\u003eCut For 3.25 inchdiameter axle tubes on the 8.8 axle.\u003c\/li\u003e\n\u003cli\u003eMay be used on other axles with minor modifications.\u003c\/li\u003e\n\u003cli\u003eMade from 1\/4 inchthick boxed steel plate For strength.\u003c\/li\u003e\n\u003cli\u003eFor use with factory TJ sway bar, not 8.8 sway bar.\u003c\/li\u003e\n\u003cli\u003eThe Style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop.\u003c\/li\u003e\n\u003cli\u003eNo more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.\u003c\/li\u003e\n\u003cli\u003eThis part requires general welding and fabrication skills.\u003c\/li\u003e\n\u003cli\u003eWelding should only be done by a competent welder.\u003c\/li\u003e\n\u003cli\u003eArtec Industries implies no guarantees or warranties and is not liable For improper installation.\u003c\/li\u003e\n\u003cli\u003eSome grinding and fitment may be required when installing this product on other axles other than the 8.8.\u003c\/li\u003e\n\u003cli\u003eEvery axle varies slightly and some fabrication may be required.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070488957081,"sku":"GNKQ_TJ8802","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/TJ8802-GNKQ.jpg?v=1767771418"},{"product_id":"tj-rear-coil-correction-kit-artec-industries","title":"TJ Rear Coil Correction Kit Artec Industries","description":"\u003cp\u003eOur new TJ Rear Coil Correction Kit fixes a common problem on lifted Jeeps bowing springs. The OEM spring perches were set at an angle which is great For no lift but once you start to lift your vehicle, the angles change resulting Inch bowing spring that can be permenantly damaged an even unseated during articulation. Our correction Kit eliminated the factory angle allowing any lift height with no bowing. We even add provisions if you want to do a 1 inch stretch.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Kit\u003c\/li\u003e\n\u003cli\u003eCNC Laser cut and CNC bent from 3\/16 inch thick steel\u003c\/li\u003e\n\u003cli\u003eCAD designed with models directly from Chrysler to fit perfectly\u003c\/li\u003e\n\u003cli\u003eChoose between Stock Location or 1 inch Stretch\u003c\/li\u003e\n\u003cli\u003eFactory tracbar mount etched cutout\u003c\/li\u003e\n\u003cli\u003eEtched alignment mark\u003c\/li\u003e\n\u003cli\u003eAccepts factory jounce cup and bolt\u003c\/li\u003e\n\u003cli\u003eSide specific etching\u003c\/li\u003e\n\u003cli\u003eWorks For TJs, and LJs and can be used Inch YJs For a coil conversion.\u003c\/li\u003e\n\u003cli\u003eMade Inch the USA.\u003c\/li\u003e\n\u003cli\u003eThis Kit requires general welding and fabrication skills.\u003c\/li\u003e\n\u003cli\u003eWelding should only be done by a competent welder.\u003c\/li\u003e\n\u003cli\u003eArtec Industries implies no guarantees or warranties and is not liable For improper installation.\u003c\/li\u003e\n\u003cli\u003eSome grinding and fitment may be required when installing this Kit.\u003c\/li\u003e\n\u003cli\u003eEvery frame varies slightly and some fabrication may be required.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070492201113,"sku":"GNKQ_TJ2015","price":175.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/TJ2015-GNKQ.jpg?v=1767771654"},{"product_id":"lower-link-shock-tabs-4-pieces-artec-industries","title":"Lower Link Shock Tabs 4 Pieces Artec Industries","description":"\u003cp\u003eIs space tight on your axle and you can't mount your shocks? Or do you need to mount the shocks offset off the axle tube. These add-on tabs allow you to take our best selling Lower Link Axle Brackets and mount your shocks offset from the axle tube. These tabs work on all three angles of lower link so you don't have to have some big specialty combo bracket that looks goofy and is bigger than a normal link bracket. These tabs also allow you to use different shock mounting widths so you don't have to spend time modifying either the bracket or the shocks to fit within a preset bracket width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Kit\u003c\/li\u003e\n\u003cli\u003eMount your shocks over the lower link joints; offset from the axle tube center line.\u003c\/li\u003e\n\u003cli\u003eWorks with 0, 10 or 22 degree angled Lower Axle Link Brackets\u003c\/li\u003e\n\u003cli\u003eUse with any shock mounting width from 1.25 inch-1.6 inch. Great For Air Shocks, Coil overs or ORI struts.\u003c\/li\u003e\n\u003cli\u003eCompact design. These use our standard Lower Link Axle Brackets so no big, goofy, special bracket is used.\u003c\/li\u003e\n\u003cli\u003eMade from 1\/4 inch thick boxed steel plate For strength.\u003c\/li\u003e\n\u003cli\u003eThe Style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop.\u003c\/li\u003e\n\u003cli\u003eNo more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.\u003c\/li\u003e\n\u003cli\u003eThis part requires general welding and fabrication skills. Welding should only be done by a competent welder.\u003c\/li\u003e\n\u003cli\u003eArtec Industries implies no guarantees or warranties and is not liable For improper installation.\u003c\/li\u003e\n\u003cli\u003eSome very slight grinding and fitment may be required when used with the 22 degree lower link axle bracket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070493184153,"sku":"GNKQ_TB1085","price":27.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/TB1085-GNKQ.jpg?v=1767771695"},{"product_id":"multi-purpose-tab-pair-large-artec-industries","title":"Multi-Purpose Tab Pair Large Artec Industries","description":"\u003cp\u003eArtec Industries is excited to announce our new line of fabricator's parts. We've taken our own approach to design and made them look different than what you see everywhere else. When you want your project to stand out, it's the little things that count. Not only do these give you a unique look, but they are also strong and highly functional. Check out what this product has to offer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Pair\u003c\/li\u003e\n\u003cli\u003eSizes: and Large For 1.25 inch rod ends\u003c\/li\u003e\n\u003cli\u003eCNC Laser cut from 1\/4 inch steel For high strength.\u003c\/li\u003e\n\u003cli\u003e1\/2 inch hole size For Small and 9\/16 inch For Large.\u003c\/li\u003e\n\u003cli\u003eOffset base to allow more surface area For welding\u003c\/li\u003e\n\u003cli\u003eUnique look - who knew a tab could get your vehicle looks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070493249689,"sku":"GNKQ_TB1028","price":19.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/TB1028-GNKQ.jpg?v=1767771702"},{"product_id":"multi-purpose-tab-pair-small-artec-industries","title":"Multi-Purpose Tab Pair Small Artec Industries","description":"\u003cp\u003eArtec Industries is excited to announce our new line of fabricator's parts. We've taken our own approach to design and made them look different than what you see everywhere else. When you want your project to stand out, it's the little things that count. Not only do these give you a unique look, but they are also strong and highly functional. Check out what this product has to offer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Pair\u003c\/li\u003e\n\u003cli\u003eSizes: Small For shocks and up to 7\/8 inch rod ends\u003c\/li\u003e\n\u003cli\u003eCNC Laser cut from 1\/4 inch steel For high strength.\u003c\/li\u003e\n\u003cli\u003e1\/2 inch hole size For Small and 9\/16 inch For Large.\u003c\/li\u003e\n\u003cli\u003eOffset base to allow more surface area For welding\u003c\/li\u003e\n\u003cli\u003eUnique look - who knew a tab could get your vehicle looks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070493315225,"sku":"GNKQ_TB1027","price":13.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/TB1027-GNKQ.jpg?v=1767771709"},{"product_id":"flat-shock-tab-pair-short-artec-industries","title":"Flat Shock Tab Pair Short Artec Industries","description":"\u003cp\u003eArtec Industries is excited to announce our new line of fabricator's parts. We've taken our own approach to design and made them look different than what you see everywhere else. When you want your project to stand out, it's the little things that count. Not only do these give you a unique look, but they are also strong and highly functional. Check out what this product has to offer.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Pair\u003c\/li\u003e\n\u003cli\u003eAvailable length: Short\u003c\/li\u003e\n\u003cli\u003eCNC Laser cut from 1\/4 inch steel For high strength.\u003c\/li\u003e\n\u003cli\u003e1\/2 inch hole size For standard shocks.\u003c\/li\u003e\n\u003cli\u003eTapered bottom half to allow more surface area For welding\u003c\/li\u003e\n\u003cli\u003eUnique look - who knew a tab could get your vehicle looks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070493380761,"sku":"GNKQ_TB1019","price":13.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/TB1019-GNKQ.jpg?v=1767771717"},{"product_id":"flat-shock-tab-pair-medium-artec-industries","title":"Flat Shock Tab Pair Medium Artec Industries","description":"\u003cp\u003eArtec Industries is excited to announce our new line of fabricator's parts. We've taken our own approach to design and made them look different than what you see everywhere else. When you want your project to stand out, it's the little things that count. Not only do these give you a unique look, but they are also strong and highly functional. Check out what this product has to offer.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Pair\u003c\/li\u003e\n\u003cli\u003eAvailable length: Medium\u003c\/li\u003e\n\u003cli\u003eCNC Laser cut from 1\/4 inch steel For high strength.\u003c\/li\u003e\n\u003cli\u003e1\/2 inch hole size For standard shocks.\u003c\/li\u003e\n\u003cli\u003eTapered bottom half to allow more surface area For welding\u003c\/li\u003e\n\u003cli\u003eUnique look - who knew a tab could get your vehicle looks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070493446297,"sku":"GNKQ_TB1018","price":13.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/TB1018-GNKQ.jpg?v=1767771724"},{"product_id":"flat-shock-tab-pair-long-artec-industries","title":"Flat Shock Tab Pair Long Artec Industries","description":"\u003cp\u003eArtec Industries is excited to announce our new line of fabricator's parts. We've taken our own approach to design and made them look different than what you see everywhere else. When you want your project to stand out, it's the little things that count. Not only do these give you a unique look, but they are also strong and highly functional. Check out what this product has to offer.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Pair\u003c\/li\u003e\n\u003cli\u003eAvailable length: Long\u003c\/li\u003e\n\u003cli\u003eCNC Laser cut from 1\/4 inch steel For high strength.\u003c\/li\u003e\n\u003cli\u003e1\/2 inch hole size For standard shocks.\u003c\/li\u003e\n\u003cli\u003eTapered bottom half to allow more surface area For welding\u003c\/li\u003e\n\u003cli\u003eUnique look - who knew a tab could get your vehicle looks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070493544601,"sku":"GNKQ_TB1017","price":14.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/TB1017-GNKQ.jpg?v=1767771730"},{"product_id":"coilover-tabs-for-truss-rear-truss-4-pieces-artec-industries","title":"Coilover Tabs For Truss Rear Truss 4 Pieces Artec Industries","description":"\u003cp\u003eThese tabs allow you to mount your shocks or coilovers near the very ends of your axle For maximum stability. They are intended For use with our Front 60 truss - bridging the gap between the inner inchc inch and the truss, reinforcing the entire axle against bending or breaking.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Kit\u003c\/li\u003e\n\u003cli\u003eArtec Front Truss: Rear Truss\u003c\/li\u003e\n\u003cli\u003eMade from CNC cut 1\/4 inch thick mild steel, these tabs are a great addition to your truss system.\u003c\/li\u003e\n\u003cli\u003eIncludes 1\/2 inch hole common to most shocks and are intended to be mounted 1.25 inch apart.\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pieces For use with two shocks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070493610137,"sku":"GNKQ_TB1010","price":30.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/TB1010-GNKQ.jpg?v=1767771738"},{"product_id":"coilover-tabs-for-truss-ford-85-91-5-dodge-4-pieces-artec-industries","title":"Coilover Tabs For Truss Ford 85-91.5\/Dodge 4 Pieces Artec Industries","description":"\u003cp\u003eThese tabs allow you to mount your shocks or coilovers near the very ends of your axle For maximum stability. They are intended For use with our Front 60 truss - bridging the gap between the inner inchc inch and the truss, reinforcing the entire axle against bending or breaking.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Kit\u003c\/li\u003e\n\u003cli\u003eArtec Front Truss: Ford 85-91.5\/ Dodge\u003c\/li\u003e\n\u003cli\u003eMade from CNC cut 1\/4 inch thick mild steel, these tabs are a great addition to your truss system.\u003c\/li\u003e\n\u003cli\u003eIncludes 1\/2 inch hole common to most shocks and are intended to be mounted 1.25 inch apart.\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pieces For use with two shocks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070493937817,"sku":"GNKQ_TB1009","price":28.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/TB1009-GNKQ.jpg?v=1767771745"},{"product_id":"coilover-tabs-for-truss-chevy-ford-78-79-4-pieces-artec-industries","title":"Coilover Tabs For Truss Chevy\/Ford 78-79 4 Pieces Artec Industries","description":"\u003cp\u003eThese tabs allow you to mount your shocks or coilovers near the very ends of your axle For maximum stability. They are intended For use with our Front 60 truss - bridging the gap between the inner inchc inch and the truss, reinforcing the entire axle against bending or breaking.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Kit\u003c\/li\u003e\n\u003cli\u003eArtec Front Truss: Chevy\/ Ford 78-79\u003c\/li\u003e\n\u003cli\u003eMade from CNC cut 1\/4 inch thick mild steel, these tabs are a great addition to your truss system.\u003c\/li\u003e\n\u003cli\u003eIncludes 1\/2 inch hole common to most shocks and are intended to be mounted 1.25 inch apart.\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pieces For use with two shocks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070494003353,"sku":"GNKQ_TB1008","price":27.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/TB1008-GNKQ.jpg?v=1767771752"},{"product_id":"1-0-inch-high-misalignment-spacers-ss-3-4-inch-pair-artec-industries","title":"1.0 Inch High Misalignment Spacers SS 3\/4 Inch Pair Artec Industries","description":"\u003cp\u003e1.0 inch High Misalignment Spacers SS (pair). These spacers are great For using any heim that has 1 inch bore\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3\/4 Bolt hole Size\u003c\/li\u003e\n\u003cli\u003eSold as Pair\u003c\/li\u003e\n\u003cli\u003eOverall width when installed on 1.25 inch Rod End is 2.625 inch.\u003c\/li\u003e\n\u003cli\u003eFits 9\/16 inch, 5\/8 inch or 3\/4 inch Bolts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070494593177,"sku":"GNKQ_SP1603","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/SP1603-GNKQ.jpg?v=1767771802"},{"product_id":"1-0-inch-high-misalignment-spacers-ss-9-16-inch-pair-artec-industries","title":"1.0 Inch High Misalignment Spacers SS 9\/16 Inch Pair Artec Industries","description":"\u003cp\u003e1.0 inch High Misalignment Spacers SS (pair). These spacers are great For using any heim that has 1 inch bore\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e9\/16 inch Bolt hole Size\u003c\/li\u003e\n\u003cli\u003eSold as Pair\u003c\/li\u003e\n\u003cli\u003eOverall width when installed on 1.25 inch Rod End is 2.625 inch.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070494920857,"sku":"GNKQ_SP1601","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/SP1601-GNKQ.jpg?v=1767771809"},{"product_id":"short-7-8-inch-high-misalignment-spacers-ss-3-4-inch-pair-artec-industries","title":"Short 7\/8 Inch High Misalignment Spacers SS 3\/4 Inch Pair  Artec Industries","description":"\u003cp\u003eThese spacers are great For using any heim that has 7\/8 inch bore and installing Inch a location where space is limited.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Pair\u003c\/li\u003e\n\u003cli\u003eAlso great For using Inch a steering application.\u003c\/li\u003e\n\u003cli\u003eOverall width when installed on 7\/8 inch Rod End is 1.625 inch.\u003c\/li\u003e\n\u003cli\u003eFits 3\/4 inch Bolts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070494986393,"sku":"GNKQ_SP1403","price":20.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/SP1403-GNKQ.jpg?v=1767771818"},{"product_id":"7-8-inch-high-misalignment-spacers-ss-3-4-inch-pair-artec-industries","title":"7\/8 Inch High Misalignment Spacers SS 3\/4 Inch Pair Artec Industries","description":"\u003cp\u003e7\/8 inch High Misalignment Spacers SS (pair). These spacers are great For using any heim that has 7\/8 inch bore.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Pair\u003c\/li\u003e\n\u003cli\u003eOverall width when installed on 7\/8 inch Rod End is 2.0 inch.\u003c\/li\u003e\n\u003cli\u003eFits either 3\/4 inch Bolts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070495051929,"sku":"GNKQ_SP1402","price":20.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/SP1402-GNKQ.jpg?v=1767771825"},{"product_id":"wide-3-4-inch-high-misalignment-spacers-ss-9-16-inch-pair-artec-industries","title":"Wide 3\/4 Inch High Misalignment Spacers SS 9\/16 Inch Pair Artec Industries","description":"\u003cp\u003eWide 3\/4 inch High Misalignment Spacers SS (pair). These spacers are great For using any heim that has a 3\/4 inch bore and installing Inch a location that has a bracket width of 2.625 inch that is commonly found Inch many stock parts\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Pair\u003c\/li\u003e\n\u003cli\u003eUsing this spacer also enables you to keep your 2.625 inch brackets if you decide to upgrade to a larger joint Inch the future, rather than cutting off the brackets and welding on new ones.\u003c\/li\u003e\n\u003cli\u003eA much better option than using two sets of spacers which allows For multiple shear points.\u003c\/li\u003e\n\u003cli\u003eMade from 303 stainless steel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070495117465,"sku":"GNKQ_SP1203","price":18.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/SP1203-GNKQ.jpg?v=1767771832"},{"product_id":"3-4-inch-high-misalignment-spacers-ss-5-8-inch-pair-artec-industries","title":"3\/4 Inch High Misalignment Spacers SS 5\/8 Inch Pair Artec Industries","description":"\u003cp\u003e3\/4 inch High Misalignment Spacers SS (pair). These spacers are great For using any heim that has a 3\/4 inch bore.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Kit\u003c\/li\u003e\n\u003cli\u003e5\/8 inch Bolt hole Size\u003c\/li\u003e\n\u003cli\u003eOverall width when installed on RUF-78X34 or RUF-34 Rod End is 1.75 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070495183001,"sku":"GNKQ_SP1202","price":18.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/SP1202-GNKQ.jpg?v=1767771839"},{"product_id":"3-4-inch-high-misalignment-spacers-ss-9-16-inch-pair-artec-industries","title":"3\/4 Inch High Misalignment Spacers SS 9\/16 Inch Pair Artec Industries","description":"\u003cp\u003e3\/4 inch High Misalignment Spacers SS (pair). These spacers are great For using any heim that has a 3\/4 inch bore.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Kit\u003c\/li\u003e\n\u003cli\u003e9\/16 inch Bolt hole Size\u003c\/li\u003e\n\u003cli\u003eOverall width when installed on RUF-78X34 or RUF-34 Rod End is 1.75 inch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070495248537,"sku":"GNKQ_SP1201","price":18.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/SP1201-GNKQ.jpg?v=1767771846"},{"product_id":"dana-60-arp-high-steer-studs-and-nuts-5-pack-kit-artec-industries","title":"Dana 60 ARP High Steer Studs and Nuts 5 Pack Kit Artec Industries","description":"\u003cp\u003eUpgrade your 60 Kingpin Axle High Steer setup with Artec Industries' ARP Stud Kits, featuring an impressive 220,000 psi tensile strength. These kits are expertly designed to fit 1 inch - 1.5 inch thick arms, with fine thread on both ends, and are specifically crafted for tapered nuts.\u003c\/p\u003e\u003cp\u003eWith Artec Industries' attention to detail and commitment to quality, trust in the strength and durability of your High Steer setup for years to come.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUpgrade 60 Kingpin Axle High Steer setup with an impressive 220,000 psi tensile strength\u003c\/li\u003e\n\u003cli\u003eFits 1 inch - 1.5 inch thick arms and has fine thread on both ends specifically crafted for tapered nuts\u003c\/li\u003e\n\u003cli\u003eExpertly designed with Artec Industries inch attention to detail and commitment to quality\u003c\/li\u003e\n\u003cli\u003eTrust in strength and durability for long-lasting performance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070495314073,"sku":"GNKQ_RR-D60117K-2","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/RR-D60117K-2_0-GNKQ.jpg?v=1767771853"},{"product_id":"dana-60-arp-high-steer-studs-and-nuts-4-pack-kit-artec-industries","title":"Dana 60 ARP High Steer Studs and Nuts 4 Pack Kit Artec Industries","description":"\u003cp\u003eUpgrade your 60 Kingpin Axle High Steer setup with Artec Industries' ARP Stud Kits, featuring an impressive 220,000 psi tensile strength. These kits are expertly designed to fit 1 inch - 1.5 inch thick arms, with fine thread on both ends, and are specifically crafted for tapered nuts.\u003c\/p\u003e\u003cp\u003eWith Artec Industries' attention to detail and commitment to quality, trust in the strength and durability of your High Steer setup for years to come.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUpgrade 60 Kingpin Axle High Steer setup with an impressive 220,000 psi tensile strength\u003c\/li\u003e\n\u003cli\u003eFits 1 inch - 1.5 inch thick arms and has fine thread on both ends specifically crafted for tapered nuts\u003c\/li\u003e\n\u003cli\u003eExpertly designed with Artec Industries inch attention to detail and commitment to quality\u003c\/li\u003e\n\u003cli\u003eTrust in strength and durability for long-lasting performance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070495379609,"sku":"GNKQ_RR-D60116K-2","price":86.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/RR-D60116K-2_0-GNKQ.jpg?v=1767771859"},{"product_id":"dana-60-arp-high-steer-stud-and-nut-single-kit-artec-industries","title":"Dana 60 ARP High Steer Stud and Nut Single Kit Artec Industries","description":"\u003cp\u003eUpgrade your 60 Kingpin Axle High Steer setup with Artec Industries' ARP Stud Kits, featuring an impressive 220,000 psi tensile strength. These kits are expertly designed to fit 1 inch - 1.5 inch thick arms, with fine thread on both ends, and are specifically crafted for tapered nuts.\u003c\/p\u003e\u003cp\u003eWith Artec Industries' attention to detail and commitment to quality, trust in the strength and durability of your High Steer setup for years to come.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUpgrade 60 Kingpin Axle High Steer setup with an impressive 220,000 psi tensile strength\u003c\/li\u003e\n\u003cli\u003eFits 1 inch - 1.5 inch thick arms and has fine thread on both ends specifically crafted for tapered nuts\u003c\/li\u003e\n\u003cli\u003eExpertly designed with Artec Industries inch attention to detail and commitment to quality\u003c\/li\u003e\n\u003cli\u003eTrust in strength and durability for long-lasting performance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070495445145,"sku":"GNKQ_RR-D60112-2","price":21.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/RR-D60112-2_0-GNKQ.jpg?v=1767771866"},{"product_id":"7-8-inch-rod-end-kit-right-hand-9-16-inch-wide-standard-artec-industries","title":"7\/8 Inch Rod End Kit Right Hand 9\/16 Inch Wide Standard Artec Industries","description":"\u003cp\u003eGreat For the builder on a budget. These rod ends from Midwest Control Products Corp are a great way to add strength, reliability, and flexibility to any situation that requires use of a rod end such as Inch suspension or steering applications. The MXM series utilizes a high strength Chromoly body with a polished chrome finish sure to impress. The ball is made from heat treated bearing steel For strength and hard chrome polished For a smooth surface. The race is injection molded nylon which keeps the joint quiet and tight For years and years of usability.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Kit\u003c\/li\u003e\n\u003cli\u003eThread Direction: Right Hand Standard\u003c\/li\u003e\n\u003cli\u003eThis Kit includes:\u003c\/li\u003e\n\u003cli\u003eOne 7\/8 inch -14tpi Chromoly rod end with 3\/4 inch bore\u003c\/li\u003e\n\u003cli\u003eOne jam nut, one Wrench Flats tube adapter For 1.0 ID -1.5 OD tubing\u003c\/li\u003e\n\u003cli\u003eTwo stainless steel 9\/16 inch-3\/4 inch Wide high misalignment spacers.\u003c\/li\u003e\n\u003cli\u003eThe mounting width with the spacer is 2.63 inch with a 9\/16 inch hole.\u003c\/li\u003e\n\u003cli\u003e7\/8 inch -14 tpi thread with 3\/4 inch bore. Ultimate Radial Static Load (lbs) 34060\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070496657561,"sku":"GNKQ_RE1402R","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/RE1402R-GNKQ.jpg?v=1767771921"},{"product_id":"7-8-inch-rod-end-kit-left-hand-9-16-inch-wide-reverse-artec-industries","title":"7\/8 Inch Rod End Kit Left Hand 9\/16 Inch Wide Reverse Artec Industries","description":"\u003cp\u003eGreat For the builder on a budget. These rod ends from Midwest Control Products Corp are a great way to add strength, reliability, and flexibility to any situation that requires use of a rod end such as Inch suspension or steering applications. The MXM series utilizes a high strength Chromoly body with a polished chrome finish sure to impress. The ball is made from heat treated bearing steel For strength and hard chrome polished For a smooth surface. The race is injection molded nylon which keeps the joint quiet and tight For years and years of usability.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Kit\u003c\/li\u003e\n\u003cli\u003eThread Direction: Left Hand Reverse\u003c\/li\u003e\n\u003cli\u003eThis Kit includes:\u003c\/li\u003e\n\u003cli\u003eOne 7\/8 inch -14tpi Chromoly rod end with 3\/4 inch bore\u003c\/li\u003e\n\u003cli\u003eOne jam nut, one Wrench Flats tube adapter For 1.0 ID -1.5 OD tubing\u003c\/li\u003e\n\u003cli\u003eTwo stainless steel 9\/16 inch-3\/4 inch Wide high misalignment spacers.\u003c\/li\u003e\n\u003cli\u003eThe mounting width with the spacer is 2.63 inch with a 9\/16 inch hole.\u003c\/li\u003e\n\u003cli\u003e7\/8 inch -14 tpi thread with 3\/4 inch bore. Ultimate Radial Static Load (lbs) 34060\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070496854169,"sku":"GNKQ_RE1402L","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/RE1402L-GNKQ.jpg?v=1767771928"},{"product_id":"jk-rear-3-link-bracket-for-rock-krawler-kits-artec-industries","title":"JK Rear 3-Link Bracket For Rock Krawler Kits Artec Industries","description":"\u003cp\u003eJK Rear 3-Link Bracket. When used with our JK Rear Truss, this heavy duty bracket is made to work Inch a Rear 3-Link Long Arm System. This item also provides you with a low profile, high-clearance alternative not currently obtainable with Rock Krawler's truss. Integrates perfectly with the Artec Rear JK Tracbar Bracket. This bracket only works if you purchase our JK Rear Truss or 1 Ton Swap Kit. This Kit requires general welding and fabrication skills including welding to the cast center section.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Each\u003c\/li\u003e\n\u003cli\u003e1\/4 inch mild steel, precision CNC cut and bent For great fitment.\u003c\/li\u003e\n\u003cli\u003eWorks with the Rock Krawler X-Factor Long Arm System, which is a 3-link setup, as well as all other Rock Krawler Kits featuring a 3-link with a truss.\u003c\/li\u003e\n\u003cli\u003eReplaces Rock Krawlers bulky, tube truss.\u003c\/li\u003e\n\u003cli\u003eWhen used with our truss, we offer a low-profile, high-clearance alternative.\u003c\/li\u003e\n\u003cli\u003eWelding should only be done by a competent welder.\u003c\/li\u003e\n\u003cli\u003eArtec Industries implies no guarantees or warranties and is not liable For improper installation.\u003c\/li\u003e\n\u003cli\u003eSome grinding and fitment may be required when installing this Kit.\u003c\/li\u003e\n\u003cli\u003eEvery axle varies slightly and some fabrication may be required.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070500982937,"sku":"GNKQ_JK4430","price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/JK4430-GNKQ.jpg?v=1767771993"},{"product_id":"jk-rear-lca-brackets-w-skids-artec-industries","title":"JK Rear LCA Brackets W\/Skids Artec Industries","description":"\u003cp\u003eJK Rear LCA Brackets with Skids. Do you have bent and mangled factory lower control arm brackets? Its no surprise since they are practically made of sheet-metal. These Heavy Duty brackets replace the factory brackets so you'll never have to worry about ripping off a bracket again. But what makes ours better? Instead of making an exact copy of the factory bracket, we added some features to actually Improve the functionality. Check out the features below that sets ours apart from the competition. This pair of brackets contains an integrated skid plate on the bottom of the bracket, which wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint. Bracket wraps around axle tube more than factory For additional weld surface area, which significantly reduces the chance the bracket can rip off.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Each\u003c\/li\u003e\n\u003cli\u003e2.625 inch mounting width fits common sized Cartridge Joints (Johnny, Flex, Ballistic, etc) and factory control arm bushings.\u003c\/li\u003e\n\u003cli\u003eMade from 1\/4 inch thick boxed steel plate For strength and impact resistance.\u003c\/li\u003e\n\u003cli\u003eThe Style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop.\u003c\/li\u003e\n\u003cli\u003eNo more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.\u003c\/li\u003e\n\u003cli\u003eShock Mounts are at factory height For a direct replacement. They do not limit your up-travel!\u003c\/li\u003e\n\u003cli\u003eProvides mounting locations For you Lower Control Arms, Shocks, and Sway Bar!\u003c\/li\u003e\n\u003cli\u003eThis bracket requires welding to the axle and removal of the factory bracket\u003c\/li\u003e\n\u003cli\u003eWelding should be done by a competent welder and Artec Industries is not liable For incorrect installation or improper welding.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070501048473,"sku":"GNKQ_JK4427","price":168.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/JK4427-GNKQ.jpg?v=1767772001"},{"product_id":"jk-rear-tracbar-bracket-artec-industries","title":"JK Rear Tracbar Bracket Artec Industries","description":"\u003cp\u003eJK Rear Trackbar Bracket. This heavy bracket is designed to take serious abuse and replace your worn JK factory rear trackbar bracket. The 1\/4 inch thick precision cut and formed components of this setup out perform the competition. This bracket offers several raised trackbar holes. Every lift is different and some trial and error may be necessary to find the ideal ride. This bracket is NOT bolt on and requires welding.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Each\u003c\/li\u003e\n\u003cli\u003e1\/4 inch mild steel. Precision CNC cut and bent For great fitment.\u003c\/li\u003e\n\u003cli\u003eReplaces factory bracket For those with 2.0 inch lift or higher.\u003c\/li\u003e\n\u003cli\u003eAdjusts roll center higher For greater stability.\u003c\/li\u003e\n\u003cli\u003eImproves ground clearance over factory brackets.\u003c\/li\u003e\n\u003cli\u003eThis Kit requires general welding and fabrication skills.\u003c\/li\u003e\n\u003cli\u003eWelding should only be done by a competent welder.\u003c\/li\u003e\n\u003cli\u003eArtec Industries implies no guarantees or warranties and is not liable For improper installation.\u003c\/li\u003e\n\u003cli\u003eSome grinding and fitment may be required when installing this Kit. Every axle varies slightly and some fabrication may be required.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070501114009,"sku":"GNKQ_JK4426","price":87.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/JK4426-GNKQ.jpg?v=1767772009"},{"product_id":"jk-front-axle-shock-mounts-artec-industries","title":"JK Front Axle Shock Mounts Artec Industries","description":"\u003cp\u003eJK Front Axle Armor Kit. These heavy duty Shock Mounts are designed to take serious abuse and provide adequate spacing For aftermarket shocks. The 1\/4 inch thick precision cut and formed components of this setup out perform the competition. Precision fit around existing brackets. Provides valuable reinforcement to an area prone to abuse. Works on both 30 and 44 series axles\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Pair\u003c\/li\u003e\n\u003cli\u003e1\/4 inch mild steel. Precision CNC cut and bent For great fitment.\u003c\/li\u003e\n\u003cli\u003eThis Kit requires general welding and fabrication skills.\u003c\/li\u003e\n\u003cli\u003eWelding should only be done by a competent welder.\u003c\/li\u003e\n\u003cli\u003eArtec Industries implies no guarantees or warranties and is not liable For improper installation.\u003c\/li\u003e\n\u003cli\u003eSome grinding and fitment may be required when installing this Kit.\u003c\/li\u003e\n\u003cli\u003eEvery axle varies slightly and some fabrication may be required.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070501441689,"sku":"GNKQ_JK4413","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/JK4413-GNKQ.jpg?v=1767772037"},{"product_id":"jk-heavy-duty-stock-tracbar-bracket-artec-industries","title":"JK Heavy Duty Stock Tracbar Bracket Artec Industries","description":"\u003cp\u003eJK Heavy Duty Stock Trackbar Bracket. This heavy bracket is designed to take serious abuse and replace your front 30 or 44 JK factory trackbar bracket. The 1\/4 inch thick precision cut and formed components of this setup out perform the competition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Each\u003c\/li\u003e\n\u003cli\u003e1\/4 inch mild steel. Precision CNC cut and bent For great fitment.\u003c\/li\u003e\n\u003cli\u003eReplaces factory bracket.\u003c\/li\u003e\n\u003cli\u003eMaintains factory sway bar mount location\u003c\/li\u003e\n\u003cli\u003eAllows rotation of steering dampener to top side of tie rod For greater clearance.\u003c\/li\u003e\n\u003cli\u003eImproves ground clearance over factory brackets.\u003c\/li\u003e\n\u003cli\u003eThis Kit requires general welding and fabrication skills.\u003c\/li\u003e\n\u003cli\u003eWelding should only be done by a competent welder.\u003c\/li\u003e\n\u003cli\u003eArtec Industries implies no guarantees or warranties and is not liable For improper installation.\u003c\/li\u003e\n\u003cli\u003eSome grinding and fitment may be required when installing this Kit. Every axle varies slightly and some fabrication may be required.\u003c\/li\u003e\n\u003cli\u003eIf your lift replaces your trackbar and mounts to the factory axle bracket (typical with an lift that includes an adjustable trackbar), choose this Bracket.\u003c\/li\u003e\n\u003cli\u003eIf you are doing a drag link flip (minimum 4.0 inch lift needed For flip), choose Raised Height Bracket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070501572761,"sku":"GNKQ_JK4407","price":60.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/JK4407-GNKQ.jpg?v=1767772044"},{"product_id":"jk-heavy-duty-raised-tracbar-bracket-artec-industries","title":"JK Heavy Duty Raised Tracbar Bracket Artec Industries","description":"\u003cp\u003eJK Heavy Duty Raised Trackbar Bracket. This heavy bracket is designed to take serious abuse and replace your front 30 or 44 JK factory trackbar bracket. The 1\/4 inch thick precision cut and formed components of this setup out perform the competition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Each\u003c\/li\u003e\n\u003cli\u003eThis bracket offers raised trackbar holes at 1.75 inch and 3.0 inch. This bracket has nothing to do with your lift amount. This Bracket is For Use With a Drag Link Flip (Which Requires a New Trackbar, Minimum 3 inch and Bumpstop Extensions.\u003c\/li\u003e\n\u003cli\u003eIf your lift replaces your trackbar and mounts to the factory axle bracket (typical with a lift that includes an adjustable trackbar), choose Factory Height Bracket. Stock Bracket Replacement.\u003c\/li\u003e\n\u003cli\u003e1\/4 inch mild steel. Precision CNC cut and bent For great fitment.\u003c\/li\u003e\n\u003cli\u003eReplaces factory bracket For those with 2.0 inch lift or higher.\u003c\/li\u003e\n\u003cli\u003eLifts factory sway bar mount 1.75 inch\u003c\/li\u003e\n\u003cli\u003eAdjusts roll center 3 inches higher For greater stability.\u003c\/li\u003e\n\u003cli\u003eAllows rotation of steering dampener to top side of tie rod For greater clearance.\u003c\/li\u003e\n\u003cli\u003eImproves ground clearance over factory brackets.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070501703833,"sku":"GNKQ_JK4406","price":91.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/JK4406-GNKQ.jpg?v=1767772051"},{"product_id":"jk-inner-c-gussets-artec-industries","title":"JK Inner C Gussets Artec Industries","description":"\u003cp\u003eJK Front Axle Truss. This heavy duty and light weight truss system and armor is designed to take serious abuse and reinforce your front 30 or 44 JK axle. The 1\/4 inch thick truss top and 10Ga. gusseting incorporates a unique design to strengthen both axle tubes, not just the long tube (commonly found Inch other designs). The precision cut and formed components of this setup ensure a hassle-free installation.Features:\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold as Pair\u003c\/li\u003e\n\u003cli\u003e1\/4 inch mild steel. Precision CNC cut and bent For great fitment.\u003c\/li\u003e\n\u003cli\u003ePrescision fit around existing lower control arm brackets.\u003c\/li\u003e\n\u003cli\u003eProvides valuable reinforcement to an area prone to abuse.\u003c\/li\u003e\n\u003cli\u003eWrap around design provides protection For OEM as well as aftermarket joints\u003c\/li\u003e\n\u003cli\u003eThis Kit requires general welding and fabrication skills including welding to the cast center section.\u003c\/li\u003e\n\u003cli\u003eWelding should only be done by a competent welder.\u003c\/li\u003e\n\u003cli\u003eArtec Industries implies no guarantees or warranties and is not liable For improper installation.\u003c\/li\u003e\n\u003cli\u003eSome grinding and fitment may be required when installing this Kit.\u003c\/li\u003e\n\u003cli\u003eEvery axle varies slightly and some fabrication may be required.\u003c\/li\u003e\n\u003cli\u003eIn rare and extreme cases, the truss may come into contact with oil pan.\u003c\/li\u003e\n\u003cli\u003ePrior to operating the vehicle, remove the coil springs, cycle the suspension including full compression of both sides simultaneously and add bumpstop extensions to prevent damage to oil pan.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070501802137,"sku":"GNKQ_JK4405","price":102.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/JK4405-GNKQ.jpg?v=1767772057"}],"url":"https:\/\/battlebornoffroad.com\/collections\/suspension-steering-brakes.oembed","provider":"Battle Born Offroad","version":"1.0","type":"link"}