{"title":"Steering Drag Link","description":null,"products":[{"product_id":"4runner-5g-aluminum-rear-link-kit-with-track-bar-artec-industries","title":"4Runner 5G Aluminum Rear Link Kit with Track Bar Artec Industries","description":"\u003cp\u003eThis kit is a great replacement for weak factory upper and lower control arms and is designed to correct vehicle geometry after lifting the vehicle. The double adjustable ends mean you can use this on nearly any height of lift kit.\u003c\/p\u003e\u003cp\u003eThese links are light, strong and have been engineer to increase off-road ride quality and performance. The polished Aluminum also stands out contrasted to the dark vehicle frame for a high end look.\u003c\/p\u003e\u003cp\u003eThe 4Runner 5th Gen Aluminum Rear Link Kit starts with our 2.0 inch outer diameter, aerospace grade 7075 Aluminum lower links and 1.5 inch OD upper links. The Aluminum links are out-fitted with time-tested Rock Krawler brand Krawler Joints with a 1.25 inch thread on the lowers and 7\/8 inch thread on the uppers with matching jam nuts.\u003c\/p\u003e\u003cp\u003eThese are the same joints shipped in nearly every Rock Krawler lift kit so you know they stand up to the test of time and abuse...not to mention there are millions of them on the streets. Each link is threaded with both a Right Hand thread and a Left Hand thread at opposite ends so it is easy to adjust the length for fine tuning. We've also included wrench flats on each end of the Aluminum link so you can easily tighten your jam nuts without marring the Aluminum.\u003c\/p\u003e\u003cp\u003eThe real advantage of our Aluminum link suspensions is the weight savings. Each link only weighs a few pounds versus steel links which can be dozens of pounds. This weight savings means better fuel mileage, less wear and tear on your vehicle and it's components, easier install and less maintenance. Aluminum also is naturally rust resistant so you don't have to continually paint them if you scratch them plus Aluminum's natural shininess adds so much curb appeal to your vehicle.\u003c\/p\u003e\u003cp\u003eA big benefit to 7075 Aluminum also is that the material has a memory and will return to its natural straight shape after taking a big hit. While steel control arms will dent and stay bent, 7075 Aluminum will remain straight for years and years of constant beating. This is most important on lower links that really take the hits on cks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSprings, shocks, limit straps, sway bar extensions, and extended brake lines are not included in this kit and will be needed.\u003c\/li\u003e\n\u003cli\u003eTwo Upper Links, Two Lower Links, And Track Bar Are Included In This Kit. Track Bar Only Used In Vehicles With A Lift, Not Stock Height.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIncluded in this Kit:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 - RH, 2 - LH - 1.25 inch -12 tpi x 9\/16 inch hole Rock Krawler Joints\u003c\/li\u003e\n\u003cli\u003e2 - RH, 2 - LH - 1.25 inch -12 tpi Jam Nuts\u003c\/li\u003e\n\u003cli\u003e2 - RH, 2 - LH - 7\/8 inch -14 tpi x 12mm hole Rock Krawler Joints\u003c\/li\u003e\n\u003cli\u003e3 - RH, 3 - LH - 7\/8 inch -14 tpi Jam Nuts\u003c\/li\u003e\n\u003cli\u003e1 - RH, 1 - LH - 7\/8 inch -14 tpi JMX Pro Rod Ends\u003c\/li\u003e\n\u003cli\u003e4 - 7\/8 inch x 14 mm High Misalignment Spacers\u003c\/li\u003e\n\u003cli\u003e2 - 2.0 inch OD 7075-T6 Polished Aluminum Lower Links\u003c\/li\u003e\n\u003cli\u003e2 - 1.5 inch OD 7075-T6 Polished Aluminum Upper Links\u003c\/li\u003e\n\u003cli\u003e1 - 1.5 inch OD 7075-T6 Polished Trackbar Link\u003c\/li\u003e\n\u003cli\u003e4 - 9\/16 inch bolts, washers, and lock nuts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2003-Present Toyota 4-Runner\u003c\/li\u003e\n\u003cli\u003e2007-Present Toyota FJ Cruiser\u003c\/li\u003e\n\u003cli\u003e2008-Present 200 Series Land Cruiser\u003c\/li\u003e\n\u003cli\u003e2003-Present Lexus GX\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070525984921,"sku":"GNKQ_LK7401","price":1539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/LK7401-GNKQ.jpg?v=1767773720"},{"product_id":"adjustable-link-tower-single-axe-tube-diameter-3-25-in-artec-industries","title":"Adjustable Link Tower Single Axe Tube Diameter 3.25 in Artec Industries","description":"\u003cp\u003eThis bracket is intended to both be highly functional and good looking - like most all our brackets. More pleasing to the eye than some of the c-channel looking towers on the market, its design also adds strength to this bracket by offering a larger bracket base.\u003cbr\u003e \u003cbr\u003eThis bracket is for use with large joints that have a 2.625 inch mounting width. This includes, but is not limited to, 1.25 inch rod ends (heims) with misalignment spacers, and rebuildable cartridge style joints with a 2.5 inch or 2.625 inch width (Johnny, Flex, Ballistic, etc). The hole size is 9\/16 inch and can be drilled for larger sizes.\u003c\/p\u003e\u003cp\u003eThe holes are set at 7, 8, and 9 inches from the axle centerline to allow you to fine tune your suspension. This bracket is made from .250 inch thick steel and comes in four unwelded pieces that jig together for easy assembly. Choose between 3.0 and 3.25 inch axle tube diameters and if your axle tube is a different size, the bracket can be easily modified to fit your axle size with some simple fabrication tools.\u003cbr\u003e\u003cbr\u003eThis bracket is especially useful if your tire size changes and your suspension needs to be adjusted. Rather than cutting off the old bracket and installing a taller one, simply move you link to the next higher mounting hole.\u003cbr\u003e\u003cbr\u003eThis bracket is intended for use with a 3-link suspension where only a single straight bracket for your upper control arm is needed. We offer a 10 degree offset version, for those who are needing angled towers.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApex Adjustable Truss Upper Link Mount\u003c\/li\u003e\n\u003cli\u003e2.63 Inch Wide\u003c\/li\u003e\n\u003cli\u003eMaterial: 1\/4 inch thick mild steel\u003c\/li\u003e\n\u003cli\u003eAxle Tube Diameter: 3.25 Inch\u003c\/li\u003e\n\u003cli\u003eIncludes 1 Single Bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This product requires general welding and fabrication skills. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is not liable for improper installation.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070534897817,"sku":"GNKQ_BR1061","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/BR1061-GNKQ.jpg?v=1767774450"},{"product_id":"adjustable-link-tower-single-axe-tube-diameter-3-0-in-artec-industries","title":"Adjustable Link Tower Single Axe Tube Diameter 3.0 in Artec Industries","description":"\u003cp\u003eThis bracket is intended to both be highly functional and good looking - like most all our brackets. More pleasing to the eye than some of the c-channel looking towers on the market, its design also adds strength to this bracket by offering a larger bracket base.\u003cbr\u003e \u003cbr\u003eThis bracket is for use with large joints that have a 2.625 inch mounting width. This includes, but is not limited to, 1.25 inch rod ends (heims) with misalignment spacers, and rebuildable cartridge style joints with a 2.5 inch or 2.625 inch width (Johnny, Flex, Ballistic, etc). The hole size is 9\/16 inch and can be drilled for larger sizes.\u003c\/p\u003e\u003cp\u003eThe holes are set at 7, 8, and 9 inches from the axle centerline to allow you to fine tune your suspension. This bracket is made from .250 inch thick steel and comes in four unwelded pieces that jig together for easy assembly. Choose between 3.0 and 3.25 inch axle tube diameters and if your axle tube is a different size, the bracket can be easily modified to fit your axle size with some simple fabrication tools.\u003cbr\u003e\u003cbr\u003eThis bracket is especially useful if your tire size changes and your suspension needs to be adjusted. Rather than cutting off the old bracket and installing a taller one, simply move you link to the next higher mounting hole.\u003cbr\u003e\u003cbr\u003eThis bracket is intended for use with a 3-link suspension where only a single straight bracket for your upper control arm is needed. We offer a 10 degree offset version, for those who are needing angled towers.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApex Adjustable Truss Upper Link Mount\u003c\/li\u003e\n\u003cli\u003e2.63 Inch Wide\u003c\/li\u003e\n\u003cli\u003eMaterial: 1\/4 inch thick mild steel\u003c\/li\u003e\n\u003cli\u003eAxle Tube Diameter: 3.0 Inch\u003c\/li\u003e\n\u003cli\u003eIncludes 1 Single Bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This product requires general welding and fabrication skills. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is not liable for improper installation.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46070535028889,"sku":"GNKQ_BR1060","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0597\/1227\/4585\/files\/BR1060-GNKQ.jpg?v=1767774457"}],"url":"https:\/\/battlebornoffroad.com\/collections\/steering-drag-link.oembed","provider":"Battle Born Offroad","version":"1.0","type":"link"}